Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the brake pedal isn't moving as much as it should when you press it.
The brake pedal position sensor monitors how far the brake pedal is pressed. If it detects that the pedal isn't moving enough, it triggers this code.
The C10B7 code is set when the brake pedal position sensor detects insufficient pedal travel. This could be due to a mechanical issue with the brake pedal or a fault in the sensor itself.
• Brake warning light on the dashboard
• Reduced braking performance
• Unusual brake pedal feel
• Faulty brake pedal position sensor
• Mechanical obstruction in the brake pedal
• Wiring issues or poor connections
Brake Pedal Position Sensor: A device that detects the position of the brake pedal and sends this information to the vehicle's computer.
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics and reporting in vehicles.
• Inspect the brake pedal for any mechanical obstructions.
• Check the brake pedal position sensor for proper operation.
• Inspect wiring and connections related to the brake pedal position sensor.
• Replace the brake pedal position sensor if faulty.
• Remove any obstructions in the brake pedal mechanism.
• Repair or replace damaged wiring or connectors.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect brake pedal and related components.
• Ensure brake system maintenance is up to date.
• Check for recalls or service bulletins related to the brake system.
Sensor Issue
• Do not ignore the brake warning light.
• Have the vehicle inspected by a professional as soon as possible.
Check with your vehicle's manufacturer for warranty coverage on brake components.
This code has been reported in vehicles with electronic brake systems, particularly in models with advanced safety features.
High – Brake issues can affect vehicle safety and should be addressed immediately.
Driving with impaired brakes can be dangerous and may violate vehicle safety regulations.
• Vehicle stationary with engine running
• Brake pedal pressed and released
The brake pedal position sensor is typically located near the brake pedal assembly inside the driver's footwell.
Q: Can I drive with a C10B7 code?
A: It's not recommended to drive with a brake-related issue. Have it checked immediately.
Q: Will resetting the code fix the problem?
A: Resetting the code won't fix the underlying issue. Proper diagnosis and repair are necessary.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.