Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer thinks that the brake pedal is being pushed down too far. It's like pressing a button too hard and the computer is worried something might be wrong.
The brake pedal position sensor is detecting that the pedal is traveling further than expected, which could indicate a problem with the braking system.
The C10B8 code is triggered when the brake pedal position sensor detects an abnormal pedal travel distance. This could be due to a mechanical issue with the brake pedal assembly or a fault in the sensor itself. The sensor's readings are outside the normal range, indicating excessive pedal travel.
• Brake warning light on the dashboard
• Unusual brake pedal feel
• Potential decrease in braking performance
• Faulty brake pedal position sensor
• Mechanical issue with the brake pedal assembly
• Wiring issues or poor electrical connections
Brake Pedal Position Sensor: A sensor that monitors the position and movement of the brake pedal.
OBD-II: On-Board Diagnostics, a standardized system for vehicle self-diagnosis and reporting.
• Inspect the brake pedal assembly for any mechanical issues.
• Check the brake pedal position sensor for correct operation.
• Examine wiring and connections for damage or corrosion.
• Replace the brake pedal position sensor if faulty.
• Repair or replace any damaged wiring or connectors.
• Adjust or repair the brake pedal assembly if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $400
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect brake components for wear.
• Ensure brake fluid levels are maintained.
• Address any brake system warnings promptly.
Sensor Issue
• Do not ignore the brake warning light.
• Have your brakes inspected by a professional.
• Ensure regular maintenance of the braking system.
Check your vehicle's warranty for coverage on brake system components.
This code has been associated with vehicles that have experienced wear in the brake pedal assembly or sensor failures.
High – Braking issues can affect vehicle safety and should be addressed promptly.
Driving with a malfunctioning brake system can be dangerous and may violate vehicle safety regulations.
• Vehicle stationary with ignition on.
• Brake pedal fully depressed.
The brake pedal position sensor is typically located near the brake pedal assembly under the dashboard.
Q: Can I drive with the C10B8 code?
A: It's not recommended to drive with this code active as it indicates a potential issue with the braking system.
Q: How do I reset the C10B8 code?
A: After repairs, the code can be cleared using an OBD-II scanner. However, ensure the issue is resolved first.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.