Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer is not getting enough power from the brake pedal sensor. Imagine if your game controller wasn't getting enough battery power to work properly.
The brake pedal position sensor needs a certain amount of voltage to function correctly. If the voltage is too low, it may not send the right signals to the car's computer.
The C10B5 code indicates that the brake pedal position sensor's supply voltage is below the expected range. This sensor is crucial for monitoring the position of the brake pedal and ensuring proper brake system operation. A low voltage condition can result in incorrect readings and affect braking performance.
• Brake warning light on the dashboard
• Inconsistent brake pedal feel
• Reduced braking performance
• ABS system may be disabled
• Unusual brake pedal behavior
• Faulty brake pedal position sensor
• Wiring issues such as frayed or damaged wires
• Poor electrical connections
• Faulty power supply to the sensor
• Corroded connectors
Brake Pedal Position Sensor: A sensor that monitors the position and movement of the brake pedal.
Voltage: The electrical potential difference, which is necessary for electronic components to function.
• Check for any stored trouble codes.
• Inspect the brake pedal position sensor and its wiring for damage.
• Measure the voltage supply to the sensor using a multimeter.
• Check connectors for corrosion or poor connections.
• Test the sensor's output signal.
• Replace the faulty brake pedal position sensor.
• Repair or replace damaged wiring.
• Clean and secure electrical connections.
• Ensure proper voltage supply to the sensor.
• Clear the trouble codes and test the system.
• OBD-II scanner
• Multimeter
• Screwdriver set
• Wire repair kit
• Connector cleaner
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect sensor wiring and connectors.
• Ensure proper maintenance of the braking system.
• Avoid exposure to moisture and corrosive elements.
Sensor Issue
• Do not ignore the brake warning light.
• Have the vehicle inspected by a professional if unsure.
• Regularly maintain the braking system.
Check with the vehicle manufacturer for warranty coverage on electronic components.
This code has been associated with vehicles that have experienced electrical issues in the braking system, often due to environmental factors affecting wiring.
High – This issue can affect braking performance, which is critical for vehicle safety.
Driving with impaired braking performance can lead to accidents. It is important to address this issue promptly.
• Vehicle ignition in the ON position.
• Brake pedal depressed.
The brake pedal position sensor is typically located near the brake pedal assembly, mounted on or near the brake pedal arm.
Q: Can I drive with this code?
A: It's not recommended to drive with this code as it can affect braking performance. Have it checked as soon as possible.
Q: How can I reset the code?
A: After repairs, use an OBD-II scanner to clear the code. If the problem persists, the code will return.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.