Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer is having trouble getting the right power to a sensor that helps with braking. It's like when a toy doesn't work because the batteries aren't in right.
The DSC (Dynamic Stability Control) system uses a brake pressure sensor to help control the vehicle's stability. This code indicates that the power supply voltage to this sensor is not within the expected range.
The C10B4 code is triggered when the Dynamic Stability Control (DSC) module detects that the power supply voltage to the brake pressure sensor is outside the specified range. This can affect the sensor's ability to accurately measure brake pressure, potentially impacting the vehicle's stability control functions.
• ABS warning light on
• Stability control system malfunction
• Reduced braking performance
• Faulty brake pressure sensor
• Wiring issues in the sensor circuit
• Defective DSC control module
DSC: Dynamic Stability Control
OBD-II: On-Board Diagnostics II
• Check for any other related error codes.
• Inspect the wiring and connectors for damage or corrosion.
• Test the brake pressure sensor for proper operation.
• Repair or replace damaged wiring or connectors.
• Replace the faulty brake pressure sensor.
• Replace the DSC control module if necessary.
• OBD-II scanner
• Multimeter
• Wiring diagram
$150 - $600
Moderate
• BMW 3 Series
• BMW 5 Series
• MINI Cooper
• Regularly inspect and maintain brake system components.
• Ensure electrical connections are clean and secure.
• Perform regular diagnostic checks.
Sensor Issue
• Do not ignore the ABS warning light.
• Have the vehicle inspected by a professional if unsure.
Check with the vehicle manufacturer for warranty coverage on the DSC module and related components.
This code has been associated with stability control issues in vehicles with advanced braking systems, particularly in models with frequent electrical issues.
Moderate – The vehicle can be driven, but stability control functions may be compromised.
Driving with a malfunctioning stability control system can increase the risk of accidents, especially in adverse conditions.
• Vehicle must be stationary.
• Ignition in the ON position.
The brake pressure sensor is typically located near the master cylinder or integrated into the DSC control module.
Q: Can I drive with the C10B4 code?
A: It's possible to drive, but the stability control system may not work properly, which can be dangerous in certain conditions.
Q: How do I reset the C10B4 code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is resolved, it should not return.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.