Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with a sensor in your car that checks the air pressure inside the engine. Sometimes it works, and sometimes it doesn't, like a light bulb that flickers on and off.
The engine control module (ECM) detects an intermittent or erratic signal from the crankcase pressure sensor B circuit.
The P2C36 code indicates that the ECM has received an inconsistent or unstable signal from the crankcase pressure sensor B. This sensor monitors the pressure within the engine's crankcase to ensure proper engine ventilation and performance. An erratic signal can lead to incorrect engine management and potential performance issues.
• Check Engine Light is on
• Poor engine performance
• Increased emissions
• Faulty crankcase pressure sensor B
• Wiring issues such as loose connections or damaged wires
• ECM malfunction
ECM: Engine Control Module
Crankcase: The part of the engine that houses the crankshaft
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connections to the crankcase pressure sensor B.
• Test the sensor for proper operation.
• Replace the crankcase pressure sensor B if faulty.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ECM if necessary.
• OBD-II scanner
• Multimeter
• Socket set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Dodge Ram
• Regular maintenance checks
• Ensure proper wiring connections
• Replace sensors at recommended intervals
Sensor Issue
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if unsure.
• Regularly check for updates on vehicle recalls or service bulletins.
Sensor issues may be covered under the vehicle's powertrain warranty. Check with the manufacturer.
This code has been associated with intermittent sensor failures in various vehicle models, often due to wiring issues.
Moderate – While the vehicle may still be drivable, it could lead to further engine issues if not addressed.
Driving with a malfunctioning sensor can lead to increased emissions, which may not comply with local environmental laws.
• Engine at operating temperature
• Vehicle in a stationary position
The crankcase pressure sensor is typically located on the engine block or near the crankcase vent.
Q: Can I drive with a P2C36 code?
A: It's possible, but not recommended as it may lead to further engine issues.
Q: How do I reset the Check Engine Light after fixing the issue?
A: Use an OBD-II scanner to clear the code after the repair is complete.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.