Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the sensor that tells the car if the charging door is open or closed is not working right. It's like if a light switch is stuck and can't tell if the light is on or off.
The code P0CCE indicates that the electrical circuit for the charge port door position sensor is reading a voltage lower than expected.
The charge port door position sensor is responsible for detecting the open or closed state of the charge port door. A 'circuit low' condition typically means that the sensor is not receiving enough voltage or there is a short to ground in the circuit.
• Charge port door not opening or closing properly
• Warning light on the dashboard
• Inability to charge the vehicle
• Faulty charge port door position sensor
• Wiring issues such as a short to ground
• Faulty connector or poor connection
Sensor: A device that detects or measures a physical property and records, indicates, or otherwise responds to it.
Circuit: A complete and closed path around which a circulating electric current can flow.
• Inspect the charge port door for physical damage.
• Check the wiring and connectors for signs of damage or corrosion.
• Test the voltage and ground at the sensor.
• Replace the charge port door position sensor.
• Repair or replace damaged wiring or connectors.
• Ensure proper connection and secure all connectors.
• Multimeter
• Screwdriver set
• OBD-II scanner
$100 - $300
Moderate
• Tesla Model S
• Chevrolet Bolt
• Nissan Leaf
• Regular inspection of the charge port door for damage.
• Keep the charge port area clean and free of debris.
• Regularly check the wiring and connectors for signs of wear.
Sensor Issue
• Avoid forcing the charge port door open or closed.
• Schedule regular maintenance checks.
• Use a cover to protect the charge port from weather elements.
Check with your vehicle manufacturer as this may be covered under the vehicle's warranty for electrical components.
This code has been more prevalent with the increase in electric vehicles, where charging systems are more common.
Moderate – While the vehicle may still operate, charging issues can lead to inconvenience and potential stranding.
Always ensure repairs are conducted by a qualified technician to prevent electrical hazards.
• Vehicle in park with ignition on.
• Charge port door manually operated.
The charge port door position sensor is typically located near the charge port, often integrated into the door mechanism.
Q: Can I still drive my car with this code?
A: Yes, but you may experience issues with charging the vehicle.
Q: Is this a common issue?
A: It can occur in electric vehicles, especially if the charge port door is frequently used or exposed to harsh conditions.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.