Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with a part of your car's computer that helps control the brakes. It's like one of the wires isn't working right, so the brakes might not work as well as they should.
The code C1092 indicates an issue with the electrical circuit of the valve coil 'I' in the Dynamic Stability Control (DSC) module.
The C1092 code is triggered when the DSC control module detects an electrical fault in the valve coil 'I' circuit. This could be due to a short circuit, open circuit, or other electrical issue within the module or its wiring.
• ABS warning light on
• Reduced braking performance
• Traction control system not working
• Faulty DSC control module
• Damaged wiring or connectors
• Short or open circuit in the valve coil 'I'
DSC: Dynamic Stability Control
OBD-II: On-Board Diagnostics II
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for damage.
• Test the DSC control module for electrical faults.
• Repair or replace damaged wiring.
• Replace faulty DSC control module.
• Clear the code and test the system.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $1000
Moderate
• BMW 3 Series
• Ford Focus
• Mazda 6
• Regular inspection of brake system wiring
• Routine maintenance of DSC system
• Avoid driving in harsh conditions that may damage wiring
Electrical Circuit Issue
• Have your brakes checked regularly.
• Address warning lights as soon as they appear.
Check with your vehicle manufacturer for warranty coverage on the DSC module.
This code has been reported in vehicles with high mileage or those frequently driven in harsh conditions.
High – Braking performance may be compromised, affecting vehicle safety.
Driving with compromised braking systems can be dangerous and may not comply with vehicle safety regulations.
• Vehicle stationary
• Ignition on
The DSC control module is typically located near the brake master cylinder or in the engine compartment.
Q: Can I drive with a C1092 code?
A: It's not recommended as it may affect your braking performance.
Q: How do I reset the C1092 code?
A: Fix the underlying issue and use an OBD-II scanner to clear the code.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.