Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with a part in your car's braking system that helps keep the car stable. It's like if a part of a toy stopped working, making the toy not work right.
The code C1094 indicates an electrical issue with a specific valve coil within the Dynamic Stability Control (DSC) module.
C1094 is triggered when the DSC module detects an electrical fault in the valve coil 'K' circuit. This coil is part of the system that controls the hydraulic pressure in the brakes, ensuring stability during driving. An electrical issue here can affect the vehicle's ability to maintain traction and stability.
• ABS warning light illuminated
• Traction control light on
• Loss of stability control
• Faulty DSC control module
• Damaged wiring or connectors in the valve coil circuit
• Short circuit or open circuit in the valve coil
DSC: Dynamic Stability Control
ABS: Anti-lock Braking System
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for damage.
• Test the DSC control module for faults.
• Repair or replace damaged wiring or connectors.
• Replace the DSC control module if faulty.
• Clear the code and test drive the vehicle to ensure the issue is resolved.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $800
Moderate
• BMW 3 Series
• Ford Explorer
• Mazda CX-5
• Regularly inspect and maintain the braking system.
• Ensure electrical connections are secure and free from corrosion.
• Avoid driving in conditions that could damage the DSC components.
Electrical Issue
• Have your vehicle inspected by a professional if you see warning lights.
• Avoid driving aggressively until the issue is resolved.
Check if your vehicle's warranty covers electronic control module repairs.
This code has been associated with issues in vehicles with advanced stability control systems, particularly in models with complex electronic braking systems.
High – This issue can affect vehicle safety and stability.
Driving with a malfunctioning stability control system can be dangerous and may not comply with safety regulations.
• Vehicle parked on a level surface
• Engine off and key out of ignition
The DSC control module is typically located near the brake master cylinder or in the engine compartment.
Q: Can I drive with code C1094?
A: It's not recommended, as it can affect the vehicle's stability and safety.
Q: Will resetting the code fix the problem?
A: Resetting the code may temporarily clear the warning light, but it won't fix the underlying issue.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.