Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer thinks the parking brake switch is stuck, like a light switch that won't turn off.
The C060A code indicates that the vehicle's electronic control unit has detected an issue with the park brake switch, which appears to be stuck in a position.
The park brake switch is responsible for signaling the status of the parking brake to the vehicle's control system. If the switch is stuck, it may continuously send an incorrect signal, causing the system to believe the parking brake is engaged or disengaged when it is not.
• Parking brake warning light stays on
• Parking brake does not engage or disengage properly
• Unusual brake behavior
• Faulty park brake switch
• Wiring issues or short circuits
• Mechanical failure in the brake system
Park Brake: A brake used to keep the vehicle stationary when parked.
Switch: A device for making and breaking the connection in an electric circuit.
• Inspect the park brake switch for physical damage.
• Check the wiring and connectors for signs of wear or corrosion.
• Test the switch functionality with a multimeter.
• Replace the faulty park brake switch.
• Repair or replace damaged wiring.
• Ensure the brake system components are functioning correctly.
• Multimeter
• Screwdriver set
• Wrench set
$100 - $300
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect brake components.
• Ensure proper maintenance of the brake system.
• Avoid excessive force when engaging the parking brake.
Sensor Issue
• Do not ignore the parking brake warning light.
• Have the vehicle inspected by a professional if the issue persists.
Check with the vehicle manufacturer for specific warranty coverage related to brake system components.
This code has been associated with vehicles equipped with electronic parking brake systems, which are more prone to sensor and switch issues.
Moderate – Address the issue promptly to ensure proper brake function.
Driving with a malfunctioning parking brake system can lead to safety hazards and may violate vehicle safety regulations.
• Vehicle parked on a level surface.
• Ignition in the 'on' position without starting the engine.
The park brake switch is typically located near the parking brake lever or pedal assembly.
Q: Can I drive with a C060A code?
A: It's not recommended to drive with this code active, as it may affect the parking brake's reliability.
Q: How do I reset the C060A code?
A: After repairing the issue, use an OBD-II scanner to clear the code from the vehicle's computer.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.