Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with the electronic system that controls the parking brake on the left side of the car. It's like when a toy's remote control isn't working right because of a bad wire.
The C060C code indicates that the voltage in the circuit controlling the left park brake actuator is lower than expected.
The Left Park Brake Actuator Control Circuit Low code is triggered when the control module detects a voltage level below the specified threshold in the control circuit for the left park brake actuator. This could be due to wiring issues, a faulty actuator, or problems with the control module.
• Parking brake warning light illuminated
• Inability to engage or release the parking brake
• Unusual noises from the brake system
• Faulty left park brake actuator
• Damaged or corroded wiring or connectors
• Faulty electronic control module
Actuator: A device that causes a mechanical system to move or operate.
Circuit: A complete and closed path around which a circulating electric current can flow.
• Check for any blown fuses related to the parking brake system.
• Inspect the wiring and connectors for damage or corrosion.
• Test the left park brake actuator for proper operation.
• Replace or repair damaged wiring or connectors.
• Replace the faulty left park brake actuator.
• Reprogram or replace the control module if necessary.
• Multimeter
• OBD-II scanner
• Basic hand tools
$150 - $500
Moderate
• Chevrolet Malibu
• Buick LaCrosse
• Cadillac CTS
• Regular inspection of the brake system wiring.
• Keep the vehicle's electrical system in good condition.
• Avoid exposure to excessive moisture and corrosive environments.
Brake System Issue
• Do not attempt to drive with a malfunctioning parking brake.
• Seek professional assistance to diagnose and repair the issue.
This repair may be covered under the vehicle's powertrain or emissions warranty. Check with the manufacturer or dealer.
This code is commonly associated with electronic parking brake systems introduced in modern vehicles.
High – A malfunctioning parking brake can affect vehicle safety.
Driving with a malfunctioning parking brake can be unsafe and may lead to legal issues if the vehicle is not roadworthy.
• Vehicle parked on a flat surface
• Ignition in the ON position
The left park brake actuator is typically located near the rear left wheel, integrated into the brake assembly.
Q: Can I drive with a C060C code?
A: It's not recommended to drive with this code active, as it indicates a problem with the parking brake system, which is crucial for safety.
Q: How do I reset the C060C code?
A: After repairs, the code can be reset using an OBD-II scanner. However, ensure the issue is fully resolved to prevent the code from returning.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.