Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer thinks the pump that helps the brakes work is getting too much electricity. It's like a toy getting too many batteries and not working right.
This code indicates that the anti-lock braking system (ABS) pump motor circuit has a higher than normal voltage, which can affect the performance of the ABS.
The ABS pump motor control circuit high code is set when the ABS module detects a voltage level in the pump motor circuit that is above the specified range. This could be due to a short to voltage, a faulty pump motor, or an issue with the ABS module itself.
• ABS warning light illuminated
• ABS system not functioning properly
• Unusual noises from the ABS pump
• Faulty ABS pump motor
• Short to voltage in the ABS pump motor circuit
• Defective ABS control module
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, Second Generation
• Check the ABS pump motor circuit for shorts or open circuits.
• Inspect the ABS pump motor for any signs of damage or wear.
• Test the ABS control module for proper operation.
• Repair or replace any damaged wiring in the ABS pump motor circuit.
• Replace the ABS pump motor if it is found to be faulty.
• Replace the ABS control module if necessary.
• Multimeter
• OBD-II scanner
• Basic hand tools
$200 - $800
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect ABS wiring and connectors.
• Ensure ABS system is serviced as per manufacturer recommendations.
• Avoid driving through deep water which can affect electrical components.
Electrical Circuit Issue
• Have the vehicle inspected by a professional mechanic.
• Do not ignore ABS warning lights as they affect braking safety.
Check with your vehicle manufacturer for warranty coverage on ABS components.
This code has been associated with issues in vehicles with high mileage or those frequently exposed to harsh conditions.
High – ABS is a critical safety system, and its failure can lead to reduced braking performance.
Driving with a malfunctioning ABS system can lead to increased stopping distances and loss of vehicle control during braking.
• Vehicle stationary
• Engine running
The ABS pump motor is typically located in the engine compartment, near the brake master cylinder.
Q: Can I drive with a C052D code?
A: It's not recommended as it affects your braking system, which is crucial for safety.
Q: Will resetting the code fix the problem?
A: Resetting the code may temporarily clear the warning light, but it won't fix the underlying issue.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.