Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer found a problem with the part that helps the brakes work better. It's like when a toy's motor doesn't have enough power to run properly.
The ABS (Anti-lock Braking System) pump motor control circuit is experiencing a low voltage condition, which can affect the operation of the ABS system.
The C052E code indicates that the ABS pump motor control circuit has a low voltage condition. This can be due to a problem with the wiring, connectors, or the pump motor itself, leading to insufficient power being supplied to the ABS pump motor.
• ABS warning light illuminated
• Reduced braking performance
• ABS system not functioning
• Faulty ABS pump motor
• Damaged wiring or connectors in the ABS circuit
• Blown fuse related to the ABS system
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, second generation
• Check the ABS fuse and replace if necessary.
• Inspect wiring and connectors for damage or corrosion.
• Test the ABS pump motor for proper operation.
• Replace the ABS pump motor if faulty.
• Repair or replace damaged wiring or connectors.
• Ensure all electrical connections are secure and free of corrosion.
• Multimeter
• OBD-II scanner
• Basic hand tools
$200 - $600
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect and maintain the ABS system.
• Check electrical connections for corrosion.
• Ensure fuses are in good condition.
Electrical Circuit Issue
• Avoid driving in conditions where ABS is critical until repaired.
• Have the vehicle inspected by a professional mechanic.
Repairs may be covered under the vehicle's powertrain or extended warranty if applicable.
This code has been associated with vehicles that have experienced electrical issues in the ABS system, often due to environmental factors such as moisture.
Moderate – It is important to address this issue soon to ensure safe braking performance.
Driving with a malfunctioning ABS can increase the risk of accidents, especially in slippery conditions.
• Vehicle parked and engine off
• Battery voltage within normal range
The ABS pump motor is typically located near the brake master cylinder or within the ABS module assembly.
Q: Can I drive with the C052E code?
A: It's not recommended to drive with this code as it may affect your braking performance.
Q: How do I reset the ABS light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.