Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
Your car has a sensor that checks the temperature of a part that helps control the engine's camshaft. This sensor is saying that the temperature is too high on one side of the engine.
The P34AB code indicates that the temperature sensor for the camshaft position actuator in Bank 2 is reading a higher than expected voltage, suggesting a high temperature condition.
The camshaft position actuator helps control the timing of the engine's valves. The temperature sensor monitors the actuator's temperature to ensure it operates within safe limits. A 'high' circuit condition means the sensor is reporting a higher voltage than normal, which usually indicates a high temperature or a circuit issue.
• Check Engine Light is on
• Poor engine performance
• Rough idling
• Reduced fuel efficiency
• Faulty temperature sensor
• Wiring issues such as shorts or open circuits
• Faulty camshaft position actuator
• Engine overheating
• ECU malfunction
Camshaft: A shaft in the engine that controls the opening and closing of the valves.
Actuator: A device that moves or controls a mechanism or system.
• Use an OBD-II scanner to confirm the code
• Inspect the wiring and connectors for damage
• Test the temperature sensor for proper operation
• Check the camshaft position actuator for faults
• Inspect the engine cooling system
• Replace the faulty temperature sensor
• Repair or replace damaged wiring/connectors
• Replace the camshaft position actuator if necessary
• Ensure the engine cooling system is functioning properly
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $500
Moderate
• Vehicle 1
• Vehicle 2
• Vehicle 3
• Regularly check and maintain engine cooling system
• Inspect wiring and connectors for wear
• Perform regular engine diagnostics
Sensor Issue
• Do not ignore the Check Engine Light
• Have the vehicle inspected by a professional
• Avoid driving the vehicle if overheating occurs
Check if the sensor or actuator is covered under the vehicle's warranty
This code is relatively uncommon and often tied to specific vehicle models with known sensor issues.
Moderate – Address the issue soon to avoid potential engine damage.
Operating a vehicle with a malfunctioning sensor can lead to increased emissions and potential engine damage.
• Engine at operating temperature
• Vehicle stationary
The camshaft position actuator temperature sensor is typically located near the camshaft on Bank 2 of the engine.
Q: Can I drive with a P34AB code?
A: It's not recommended as it can lead to engine damage or increased emissions.
Q: How can I reset the Check Engine Light?
A: You can use an OBD-II scanner to reset the light, but it's important to fix the underlying issue first.
Budget · Bluetooth scanner
An app-based scanner with repair reports and enhanced system diagnostics on supported vehicles.
Helpful when live data and repair-report guidance can narrow down a drivability issue.
View on Amazon
Specialty · Fuel pressure tester
Helpful for no-start, lean, rich, injector, and fuel-delivery diagnosis.
Useful for checking whether fuel delivery is contributing to the fault.
View on Amazon
Specialty · Compression tester
Useful when misfire, mechanical condition, or low-cylinder-pressure problems are suspected.
Helpful when you need to rule out low compression or mechanical engine problems.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.