Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This means that the car's computer has detected a problem with the electrical circuit that controls the fuel injector for cylinder number 6. It's like when a light bulb doesn't work because there's a problem with the wire connecting it.
The engine control module (ECM) monitors the electrical circuit for the high-pressure fuel injector in cylinder 6. If the voltage is too low, it triggers this code.
The P3164 code indicates that the ECM has detected a low voltage condition in the high side circuit of the high-pressure fuel injector for cylinder 6. This can be due to wiring issues, a faulty injector, or problems with the ECM itself.
• Engine misfire
• Poor fuel economy
• Check Engine Light illuminated
• Rough engine idle
• Faulty fuel injector
• Open or shorted wiring in the injector circuit
• Bad electrical connection
• Faulty ECM
ECM: Engine Control Module
Injector: A device that sprays fuel into the engine's cylinders
• Use a scan tool to read the code and freeze frame data.
• Inspect the wiring and connectors for cylinder 6 injector.
• Test the injector resistance and voltage supply.
• Check ECM for proper operation.
• Repair or replace any damaged wiring or connectors.
• Replace the faulty fuel injector.
• Update or replace the ECM if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $500
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect and maintain the fuel system.
• Use quality fuel to prevent injector clogging.
• Ensure proper electrical connections.
Engine Performance
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if unsure.
• Avoid driving the vehicle if it runs rough.
Check with the vehicle manufacturer for warranty coverage on the fuel system components.
This code has become more common with the use of high-pressure fuel systems in modern vehicles.
Moderate – Addressing this issue promptly can prevent further engine damage.
Driving with a misfiring engine can lead to increased emissions and potential engine damage.
• Engine at operating temperature
• Vehicle in park or neutral
The fuel injector for cylinder 6 is located on the engine, typically near the intake manifold.
Q: Can I drive with a P3164 code?
A: It's not recommended to drive for long periods with this code as it can cause further engine damage.
Q: How serious is a P3164 code?
A: It's moderately serious. It can lead to poor engine performance and increased emissions.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.
Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.
Check the correct plug type, gap, and engine application for your vehicle.
View options on Amazon
Fitment Required · Vehicle-fitment part
Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.
Some ignition faults involve coil performance or cylinder-specific coil problems.
Match the coil to your engine and confirm the failed component before ordering.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.