Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer thinks the gear shift lever is not working right because the sensor that tells it what position the gear lever is in is sending too high of a signal.
The P2E03 code is triggered when the powertrain control module (PCM) detects a high voltage condition in the gear lever position sensor 'A' circuit.
The gear lever position sensor provides feedback to the vehicle's PCM regarding the current position of the gear lever. A 'circuit high' condition indicates that the voltage signal from the sensor is higher than expected, possibly due to a short circuit or faulty sensor.
• Check engine light is on
• Transmission may not shift properly
• Erratic or incorrect gear display
• Faulty gear lever position sensor
• Wiring issues such as short circuits or damaged wires
• Faulty PCM or transmission control module
PCM: Powertrain Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code
• Inspect the wiring and connectors for damage or corrosion
• Test the gear lever position sensor with a multimeter
• Replace the gear lever position sensor
• Repair or replace damaged wiring or connectors
• Reprogram or replace the PCM if necessary
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $400
Moderate
• Toyota Camry
• Ford F-150
• Honda Accord
• Regularly inspect wiring and connectors for damage
• Keep the transmission system well-maintained
• Avoid harsh gear shifting
Sensor Issue
• Avoid driving the vehicle until the issue is resolved to prevent further damage
• Consult a professional mechanic for accurate diagnosis
Check with the vehicle manufacturer for warranty coverage on transmission components.
This code has been associated with sensor failures and wiring issues in various vehicle models over the years.
Moderate – It is advisable to address this issue soon to prevent potential transmission problems.
Driving with a malfunctioning gear position sensor can lead to unsafe driving conditions.
• Vehicle must be in a safe, stationary position
• Transmission should be in 'Park' or 'Neutral'
The gear lever position sensor is typically located near the gear shift mechanism or within the transmission housing.
Q: Can I drive with a P2E03 code?
A: It's not recommended as it can lead to transmission issues or unsafe driving conditions.
Q: How do I reset the P2E03 code?
A: After repairs, use an OBD-II scanner to clear the code, but ensure the issue is fixed first.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.