Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that a sensor that checks how hot a part of the electric motor is, is saying the temperature is too high. It's like a thermometer that is reading a very high temperature when it shouldn't be.
The P2DAF code is triggered when the temperature sensor for Drive Motor A (specifically Sensor B) detects a voltage signal that is higher than expected, indicating a potential issue with the sensor or its circuit.
The P2DAF code is set when the Powertrain Control Module (PCM) detects a high voltage condition in the circuit of the temperature sensor B for Drive Motor A. This could indicate a short to voltage, a faulty sensor, or an issue with the wiring or connections.
• Check Engine Light illuminated
• Possible reduced performance of the drive motor
• Overheating warning on dashboard
• Faulty temperature sensor
• Wiring issues such as short to voltage
• Poor electrical connections
PCM: Powertrain Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connections to the temperature sensor.
• Test the temperature sensor for proper operation.
• Replace the faulty temperature sensor.
• Repair or replace damaged wiring.
• Ensure all connections are secure and free of corrosion.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Chevrolet Bolt
• Nissan Leaf
• Tesla Model 3
• Regularly inspect wiring and connections.
• Perform routine maintenance checks.
• Avoid driving in extreme conditions that could cause overheating.
Sensor Issue
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if unsure.
• Monitor the vehicle's performance for any changes.
Check with your vehicle manufacturer for warranty coverage on sensors and related components.
This code is relatively uncommon and typically associated with electric or hybrid vehicles due to their complex motor systems.
Moderate – Address the issue soon to prevent potential damage to the drive motor.
Driving with a known issue can lead to further damage or safety risks. Always ensure your vehicle is safe to operate.
• Vehicle at operating temperature
• Drive motor in use
The temperature sensor is typically located near the drive motor, often integrated into the motor assembly or cooling system.
Q: Can I drive with a P2DAF code?
A: It's not recommended as it could lead to further damage. Have it checked as soon as possible.
Q: What happens if I ignore this code?
A: Ignoring the code could result in motor damage or reduced vehicle performance.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.