Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer isn't getting any information from a sensor that tells it how fast a part inside the transmission is spinning.
The P2751 code indicates that the vehicle's Powertrain Control Module (PCM) has detected no signal from the Intermediate Shaft Speed Sensor C. This sensor provides data on the rotational speed of a shaft within the transmission.
The Intermediate Shaft Speed Sensor C is responsible for monitoring the rotational speed of a shaft inside the transmission. The sensor sends this data to the PCM, which uses it to control transmission shifting and ensure smooth operation. If the PCM does not receive a signal from this sensor, it triggers the P2751 code.
• Check Engine Light is on
• Transmission may not shift properly
• Poor fuel economy
• Faulty Intermediate Shaft Speed Sensor C
• Damaged or corroded wiring or connectors
• Faulty PCM
PCM: Powertrain Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors related to the sensor for damage or corrosion.
• Test the Intermediate Shaft Speed Sensor C for proper operation.
• Replace the Intermediate Shaft Speed Sensor C if faulty.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the PCM if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $400
Moderate
• Toyota Camry
• Honda Accord
• Ford F-150
• Regular maintenance and inspection of transmission components.
• Ensure wiring and connectors are free from corrosion.
• Address any transmission issues promptly.
Sensor Issue
• Avoid driving at high speeds until the issue is resolved.
• Consult a professional mechanic for a thorough diagnosis.
Check if the vehicle's powertrain warranty covers sensor replacement.
This code has been associated with transmission sensor issues in various models over the years, often due to sensor failure or wiring problems.
Moderate – It's important to address this issue to prevent potential transmission damage.
Driving with a malfunctioning transmission sensor can lead to unsafe driving conditions.
• Vehicle in park or neutral.
• Engine running and warmed up.
The Intermediate Shaft Speed Sensor C is typically located on the transmission housing.
Q: Can I drive with a P2751 code?
A: It's not recommended to drive for extended periods with this code, as it may lead to transmission issues.
Q: How long does it take to fix a P2751 code?
A: Depending on the cause, repairs can take anywhere from 1 to 3 hours.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.