Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
Your car has a part that helps change gears smoothly. This part is stuck in the 'on' position, which can make your car drive funny.
The transmission control module (TCM) has detected that the pressure control solenoid F is not functioning as expected and is stuck in the 'on' position.
The P2733 code indicates a malfunction with the pressure control solenoid F, which is responsible for regulating hydraulic pressure in the transmission. When this solenoid is stuck on, it can cause abnormal transmission operation, such as harsh shifting or slipping.
• Harsh or erratic shifting
• Transmission slipping
• Check Engine Light illuminated
• Faulty pressure control solenoid F
• Wiring issues or poor connections
• Transmission fluid contamination
Solenoid: An electromechanical device that controls the flow of fluid.
Transmission: A system in a vehicle that transmits power from the engine to the wheels.
• Use an OBD-II scanner to confirm the code.
• Inspect the transmission fluid for contamination.
• Check the wiring and connections to the solenoid.
• Replace the pressure control solenoid F.
• Repair or replace damaged wiring.
• Flush and replace the transmission fluid.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $600
Moderate
• Toyota Camry
• Honda Accord
• Ford F-150
• Regular transmission fluid changes
• Routine vehicle maintenance
• Inspect transmission wiring periodically
Transmission Issue
• Avoid driving aggressively until repaired.
• Have the transmission checked by a professional.
Check if your vehicle's transmission is still under warranty, as this repair may be covered.
This code has been reported more frequently in vehicles with higher mileage and those that do not receive regular transmission maintenance.
Moderate – Address the issue soon to prevent further transmission damage.
Ignoring transmission issues can lead to unsafe driving conditions. Always address Check Engine Light warnings promptly.
• Vehicle at operating temperature
• Driving under normal conditions
The pressure control solenoid F is located inside the transmission, usually accessible by removing the transmission pan.
Q: Can I drive with a P2733 code?
A: It's not recommended to drive for long periods with this code, as it can lead to further transmission damage.
Q: How can I prevent a P2733 code?
A: Regular maintenance, including transmission fluid changes, can help prevent this issue.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.