Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer has detected that the temperature sensor in the brake booster is reading a value that's too high. It's like when a thermometer shows a temperature that's too hot.
The P25C7 code indicates that the voltage signal from the brake booster temperature sensor is higher than the expected range. This could mean the sensor is faulty or there is an issue with the wiring.
The brake booster temperature sensor monitors the temperature of the brake booster to ensure it operates within safe limits. A high circuit signal suggests that the sensor is reading a higher temperature than normal, which could be due to a sensor failure, wiring issue, or an actual temperature problem.
• Brake warning light illuminated
• Reduced braking performance
• Unusual brake pedal feel
• Possible ABS (Anti-lock Braking System) warning light
• Faulty brake booster temperature sensor
• Wiring issues or poor connections
• Faulty brake booster
• ECU (Engine Control Unit) malfunction
Brake Booster: A device that increases the force applied to the brake pedal.
ECU: Engine Control Unit, the computer that controls engine functions.
• Perform a visual inspection of the brake booster and sensor wiring.
• Use a multimeter to check the sensor's voltage output.
• Test the sensor's resistance to ensure it is within specifications.
• Inspect the ECU for any signs of damage or malfunction.
• Replace the brake booster temperature sensor.
• Repair or replace damaged wiring or connectors.
• Replace the brake booster if it is faulty.
• Reprogram or replace the ECU if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools (screwdriver, wrench set)
$150 - $500
Moderate
• Toyota Camry
• Honda Accord
• Ford F-150
• Regular maintenance checks of the braking system
• Ensure proper electrical connections
• Monitor brake system performance regularly
Sensor Issue
• Do not ignore brake warning lights on the dashboard.
• Seek professional help if unsure about the repair process.
Repairs may be covered under vehicle warranty if the vehicle is still within the warranty period.
This code has been reported in vehicles with advanced braking systems that include temperature monitoring for enhanced safety.
High – Brake system issues should be addressed immediately to ensure vehicle safety.
Driving with a compromised braking system can be dangerous and may violate vehicle safety regulations.
• Vehicle at operating temperature
• Brake system engaged
The brake booster temperature sensor is typically located near the brake booster assembly in the engine bay.
Q: Can I drive with a P25C7 code?
A: It's not recommended to drive with this code as it may indicate a problem with the braking system.
Q: How do I reset a P25C7 code?
A: After repairs, use an OBD-II scanner to clear the code, but ensure the issue is fixed to prevent recurrence.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.