Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
Your car has a system that checks for leaks in the fuel tank and pipes. This code means there's a problem with the part that controls a valve in that system.
The code indicates that the control circuit for the EVAP system's leak detection pump switching valve is reading a low voltage.
The EVAP (Evaporative Emission Control) system prevents fuel vapors from escaping into the atmosphere. The leak detection pump is part of this system and checks for leaks. The switching valve controls the flow of air or vapor through the system. A 'circuit low' means the voltage in the control circuit is lower than expected, possibly due to wiring issues, a faulty valve, or a malfunctioning pump.
• Check Engine Light is on
• Failed emissions test
• Fuel smell from the vehicle
• Faulty leak detection pump
• Damaged or corroded wiring or connectors
• Faulty switching valve
EVAP: Evaporative Emission Control System
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for damage or corrosion.
• Test the leak detection pump and switching valve for proper operation.
• Repair or replace damaged wiring or connectors.
• Replace the faulty leak detection pump.
• Replace the faulty switching valve.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $400
Moderate
• Volkswagen Jetta
• Audi A4
• BMW 3 Series
• Regularly inspect and maintain the EVAP system.
• Ensure fuel cap is properly sealed.
• Avoid overfilling the fuel tank.
Sensor Issue
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if unsure.
• Regular maintenance can prevent such issues.
Check with your vehicle manufacturer for warranty coverage on emission-related components.
This code has been associated with issues in vehicles with complex EVAP systems, particularly in models with advanced emission control technologies.
Moderate – It should be addressed soon to avoid potential emissions test failures and to ensure the vehicle operates efficiently.
Driving with an emissions system fault may be illegal in some regions and could lead to a failed emissions test.
• Vehicle at operating temperature
• Fuel level between 15% and 85%
The leak detection pump and switching valve are typically located near the fuel tank or within the rear wheel well.
Q: Can I drive my car with a P24BE code?
A: Yes, but it's advisable to get it checked soon to avoid emissions issues.
Q: Will a P24BE code affect my car's performance?
A: It may not affect performance directly, but can lead to emissions problems.
Budget · Enhanced code reader
A wired color-screen reader with readiness hotkeys, live data, code definitions, and data logging.
Good for emissions-related codes because it exposes readiness monitors and live powertrain data.
View on Amazon
Specialty · Smoke machine
Helpful for finding EVAP and vacuum leaks that are hard to see with visual inspection alone.
Helpful for tracking down EVAP and vacuum leaks that can trigger emissions faults.
View on Amazon
Specialty · O2 sensor socket
Helpful when the code points toward exhaust or oxygen-sensor work and space is tight.
Useful when the diagnosis points toward oxygen-sensor removal or replacement.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Relevant when EVAP diagnosis points toward purge-flow or purge-control faults.
EVAP diagnosis often includes purge-flow and valve-control faults.
Confirm the failed valve and exact fitment before buying parts.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.