Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's system is saying that something is wrong with the filter that catches dirty stuff from the engine. It's not working as it should on one side of the car.
The code indicates that the differential pressure across the diesel particulate filter (DPF) on bank 2 is lower than expected.
The diesel particulate filter (DPF) is designed to capture and store exhaust soot in order to reduce emissions. The differential pressure sensor measures the pressure difference across the filter to determine its load. If the pressure is too low, it may indicate a leak, a sensor issue, or that the filter is not accumulating soot as expected.
• Check Engine Light is on
• Reduced engine performance
• Increased emissions
• Faulty differential pressure sensor
• Exhaust leak
• DPF is not accumulating soot due to a fault
DPF: Diesel Particulate Filter
OBD-II: On-Board Diagnostics II
• Verify the code using an OBD-II scanner.
• Inspect the differential pressure sensor and its wiring.
• Check for exhaust leaks around the DPF.
• Replace the differential pressure sensor if faulty.
• Repair any exhaust leaks.
• Clean or replace the DPF if necessary.
• OBD-II scanner
• Multimeter
• Wrench set
$200 - $1000
Moderate
• Ford F-250
• Chevrolet Silverado
• Ram 2500
• Regularly inspect the exhaust system.
• Use high-quality fuel.
• Perform regular maintenance on the DPF.
Sensor Issue
• Do not ignore the Check Engine Light.
• Have your vehicle inspected by a professional.
• Avoid driving the vehicle hard until the issue is resolved.
Check with your vehicle manufacturer for warranty coverage on emission-related components.
This code is commonly associated with diesel engines and can indicate issues with the DPF system that have been known to occur as vehicles age.
Moderate – It should be addressed soon to avoid further damage.
Driving with a malfunctioning DPF can lead to increased emissions, which may violate local environmental regulations.
• Engine running
• Vehicle at operating temperature
The differential pressure sensor is typically located near the diesel particulate filter on the exhaust system.
Q: Can I drive with a P2464 code?
A: It's not recommended to drive for extended periods with this code, as it can lead to increased emissions and potential engine damage.
Q: How do I clear a P2464 code?
A: After repairs, the code can be cleared with an OBD-II scanner. However, ensure the issue is fixed before clearing the code.
Budget · Enhanced code reader
A wired color-screen reader with readiness hotkeys, live data, code definitions, and data logging.
Good for emissions-related codes because it exposes readiness monitors and live powertrain data.
View on Amazon
Specialty · Smoke machine
Helpful for finding EVAP and vacuum leaks that are hard to see with visual inspection alone.
Helpful for tracking down EVAP and vacuum leaks that can trigger emissions faults.
View on Amazon
Specialty · O2 sensor socket
Helpful when the code points toward exhaust or oxygen-sensor work and space is tight.
Useful when the diagnosis points toward oxygen-sensor removal or replacement.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.