Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This means that the pressure inside the engine's cylinder number 10 is lower than it should be. It's like one of the balloons in a bunch has less air than the others.
The engine control module (ECM) has detected that the pressure in cylinder 10 is lower than expected, which could affect engine performance.
P2359 indicates that the ECM has registered a pressure variation in cylinder 10 that is below the acceptable threshold. This could be due to a mechanical issue within the cylinder or a problem with the sensors reading the pressure.
• Engine misfire
• Reduced engine performance
• Increased fuel consumption
• Faulty pressure sensor
• Leaking cylinder head gasket
• Worn piston rings
ECM: Engine Control Module
Cylinder: A chamber within the engine where fuel is burned to produce power
• Check for any other related codes.
• Inspect the pressure sensor and wiring for damage.
• Perform a compression test on cylinder 10.
• Replace the faulty pressure sensor.
• Repair or replace the cylinder head gasket.
• Replace worn piston rings.
• OBD-II scanner
• Compression tester
• Multimeter
$200 - $1500
Moderate
• Ford F-150
• Chevrolet Silverado
• Dodge Ram
• Regular engine maintenance
• Timely oil changes
• Use of quality fuel
Engine Performance
• Have the vehicle inspected by a professional mechanic.
• Avoid heavy engine loads until the issue is resolved.
Check with your vehicle manufacturer for warranty coverage on engine components.
This code is relatively uncommon and is often associated with high-mileage vehicles or those with engine modifications.
Moderate – It is important to address this issue soon to prevent further engine damage.
Ignoring engine performance issues can lead to increased emissions and may not comply with local regulations.
• Engine at operating temperature
• Vehicle in park or neutral
Cylinder 10 is located on the engine block, typically towards the rear on V-type engines.
Q: Can I drive with a P2359 code?
A: It's not recommended to drive for long distances with this code as it can lead to further engine damage.
Q: How can I prevent cylinder pressure issues?
A: Regular maintenance and using quality engine oil can help prevent pressure issues.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.
Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.
Check the correct plug type, gap, and engine application for your vehicle.
View options on Amazon
Fitment Required · Vehicle-fitment part
Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.
Some ignition faults involve coil performance or cylinder-specific coil problems.
Match the coil to your engine and confirm the failed component before ordering.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.