Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the gas pedal is being pressed too hard, even when it's not. It's like when a video game controller gets stuck and the game thinks you're always pressing a button.
The P2133 code is triggered when the Engine Control Module (ECM) detects a high voltage signal from the throttle/pedal position sensor/switch F circuit, indicating an issue with the sensor or its circuit.
The throttle/pedal position sensor/switch F is part of the electronic throttle control system. It monitors the position of the throttle or pedal and sends this information to the ECM. A 'circuit high' condition means that the voltage signal from the sensor is higher than the expected range, indicating a possible short circuit or sensor malfunction.
• Check Engine Light illuminated
• Reduced engine performance
• Unresponsive throttle
• Faulty throttle/pedal position sensor
• Wiring issues such as shorts or open circuits
• Faulty ECM
ECM: Engine Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for damage or corrosion.
• Test the throttle/pedal position sensor for proper operation.
• Replace the throttle/pedal position sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ECM if necessary.
• OBD-II scanner
• Multimeter
• Screwdriver set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect and maintain the throttle system.
• Ensure connectors are clean and secure.
• Avoid exposure to moisture and contaminants.
Sensor Issue
• Do not ignore the check engine light.
• Have the vehicle inspected by a professional if unsure.
• Avoid driving the vehicle if throttle issues persist.
Check with the vehicle manufacturer for specific warranty coverage related to the throttle system.
This code has been associated with electronic throttle control issues since the introduction of drive-by-wire systems in vehicles.
Moderate – This issue can affect vehicle performance and should be addressed soon to avoid potential safety risks.
Driving with a malfunctioning throttle system can be dangerous. Ensure repairs are performed by a qualified technician.
• Engine running
• Throttle system engaged
The throttle/pedal position sensor is typically located on the throttle body or near the accelerator pedal.
Q: Can I drive with a P2133 code?
A: It's not recommended to drive with this code, as it can cause unpredictable throttle behavior.
Q: How do I reset the P2133 code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is resolved, the code should not return.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.