Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer is having trouble reading how much gas is in the tank because something is wrong with the sensor that measures it.
The P2067 code indicates that the fuel level sensor B circuit is reporting a voltage that is lower than expected by the vehicle's powertrain control module (PCM).
The fuel level sensor B is responsible for sending the fuel level information to the vehicle's PCM. When the PCM detects a voltage signal from this sensor that is lower than the specified range, it triggers the P2067 code. This could be due to a short circuit, faulty sensor, or wiring issues.
• Inaccurate fuel gauge reading
• Check Engine Light illuminated
• Potential fuel starvation if the gauge reads incorrectly
• Faulty fuel level sensor B
• Short in the fuel level sensor circuit
• Poor electrical connection or corroded wiring
PCM: Powertrain Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to verify the P2067 code.
• Inspect the wiring and connectors for damage or corrosion.
• Test the fuel level sensor B for proper operation.
• Repair or replace damaged wiring or connectors.
• Replace the faulty fuel level sensor B.
• Clear the code and test drive to ensure the issue is resolved.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly check and maintain fuel system components.
• Ensure electrical connections are clean and secure.
• Use quality fuel to prevent sensor contamination.
Sensor Issue
• Do not rely solely on the fuel gauge if this code is present.
• Keep track of fuel consumption manually until the issue is resolved.
Repairs may be covered under the vehicle's powertrain warranty if applicable.
This code has been reported in vehicles with high mileage or those exposed to harsh environmental conditions.
Moderate – While the vehicle can still be driven, inaccurate fuel readings can lead to unexpected fuel shortages.
Driving with an inaccurate fuel gauge can lead to running out of fuel unexpectedly, which may pose a safety risk.
• Vehicle must be on a level surface.
• Ensure the fuel tank is not empty before testing.
The fuel level sensor is typically located inside the fuel tank, attached to the fuel pump assembly.
Q: Can I drive with a P2067 code?
A: Yes, but be cautious as the fuel gauge may not be accurate, leading to potential fuel shortages.
Q: How do I know if the fuel level sensor is faulty?
A: If the fuel gauge is erratic or stuck, and the P2067 code is present, the sensor may be faulty.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.