Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer has detected a problem with the sensor that checks the voltage for the car's charging system. It's like when a battery tester shows a number that's too high.
The P1C47 code is triggered when the voltage sensor circuit in the Universal Charger Extension Control Module detects a voltage level that is higher than expected.
The Universal Charger Extension Control Module monitors the voltage levels to ensure proper charging operations. When the sensor circuit reports a voltage that exceeds the specified threshold, the system triggers the P1C47 code. This could indicate a fault in the sensor, wiring, or the control module itself.
• Charging system warning light on
• Inability to charge the vehicle
• Unusual charging behavior
• Faulty voltage sensor
• Wiring issues or poor connection
• Defective Universal Charger Extension Control Module
OBD-II: On-Board Diagnostics, a standardized system for self-diagnosing vehicle issues.
Voltage Sensor: A device that measures the electrical potential difference between two points.
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connections to the voltage sensor.
• Test the voltage sensor for proper operation.
• Repair or replace damaged wiring or connectors.
• Replace the faulty voltage sensor.
• Replace the Universal Charger Extension Control Module if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $500
Moderate
• Chevrolet Volt
• Nissan Leaf
• BMW i3
• Regularly inspect charging system components.
• Ensure all electrical connections are secure.
• Avoid overloading the vehicle's electrical system.
Sensor Issue
• Do not ignore the warning light; have the system checked.
• Avoid using the vehicle's charging system until the issue is resolved.
Check with the vehicle manufacturer for warranty coverage on charging system components.
This code has become more common with the increase in electric and hybrid vehicles, highlighting the importance of reliable charging systems.
High – Charging system issues can prevent the vehicle from operating properly.
Driving with a malfunctioning charging system can lead to vehicle breakdowns and is not recommended.
• Vehicle in park with engine off.
• Access to charging system components.
The Universal Charger Extension Control Module is typically located near the vehicle's charging port or battery compartment.
Q: Can I drive with the P1C47 code?
A: It's not recommended to drive with this code as it may affect the vehicle's ability to charge properly.
Q: How do I reset the P1C47 code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is resolved, the code should not return.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.