Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with the sensor that tells the car how fast the rear right wheel is spinning. It's like when a toy car's wheel gets stuck and the toy can't tell how fast it's moving.
The P14F7 code indicates that the signal from the rear right wheel speed sensor is too high, suggesting a circuit issue.
The wheel speed sensor monitors the rotational speed of the wheel and sends this information to the vehicle's control modules. A 'circuit high' condition means the sensor is sending a voltage signal that is higher than the expected range, which could be due to a short circuit, faulty sensor, or wiring issues.
• ABS warning light on
• Traction control system disabled
• Inaccurate speedometer reading
• Faulty wheel speed sensor
• Damaged wiring or connectors
• Short circuit in the sensor circuit
ABS: Anti-lock Braking System
Sensor: A device that detects or measures a physical property and records, indicates, or otherwise responds to it.
• Use an OBD-II scanner to confirm the code.
• Inspect the rear right wheel speed sensor and its wiring.
• Check for any signs of damage or corrosion in the connectors.
• Replace the faulty wheel speed sensor.
• Repair or replace damaged wiring.
• Clear the code and test drive to ensure the issue is resolved.
• OBD-II scanner
• Multimeter
• Socket set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect wheel speed sensors.
• Keep connectors clean and free of corrosion.
• Avoid harsh driving conditions that may damage wiring.
Sensor Issue
• Do not ignore the ABS warning light.
• Have the vehicle inspected by a professional if unsure.
Check with your vehicle manufacturer for specific warranty coverage related to sensors.
Wheel speed sensor issues have been common in vehicles with advanced ABS and traction control systems.
Moderate – While the vehicle is still drivable, the ABS and traction control systems may not function properly.
Driving with a malfunctioning ABS system can increase stopping distances and reduce control during emergency braking.
• Vehicle at rest
• Vehicle in motion on a smooth surface
The rear right wheel speed sensor is located near the wheel hub assembly on the rear right wheel.
Q: Can I drive with a P14F7 code?
A: Yes, but it's not recommended as the ABS and traction control systems may not work properly.
Q: How can I reset the code?
A: After repairs, use an OBD-II scanner to clear the code and see if it returns.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.