Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer is getting a weak signal from the sensor that tells it how fast the front left wheel is spinning.
The wheel speed sensor is responsible for sending information about the wheel's rotation speed to the car's computer. A 'circuit low' condition indicates that the signal from the sensor is weaker than expected.
The P14F0 code is triggered when the Engine Control Module (ECM) detects a low voltage signal from the front left wheel speed sensor circuit. This could be due to a poor electrical connection, a faulty sensor, or damaged wiring.
• ABS warning light on
• Traction control light on
• Inconsistent speedometer readings
• Faulty wheel speed sensor
• Damaged wiring or connectors
• Corroded electrical connections
ECM: Engine Control Module
ABS: Anti-lock Braking System
• Inspect the front left wheel speed sensor for damage.
• Check the wiring and connectors for corrosion or damage.
• Use a multimeter to test the sensor's voltage output.
• Replace the faulty wheel speed sensor.
• Repair or replace damaged wiring.
• Clean and secure any corroded connections.
• Multimeter
• Socket set
• Wire stripper/crimper
$100 - $300
Moderate
• Toyota Camry
• Honda Accord
• Ford Fusion
• Regularly inspect wheel speed sensors and wiring.
• Avoid driving through deep water to prevent corrosion.
• Schedule regular maintenance checks.
Sensor Issue
• Have the vehicle inspected by a professional if the ABS light is on.
• Avoid hard braking until the issue is resolved.
Check with your vehicle manufacturer for warranty coverage on sensors.
This code is commonly seen in vehicles with high mileage or those exposed to harsh environmental conditions.
Moderate – While the vehicle is still drivable, the ABS and traction control systems may not function properly.
Driving with a malfunctioning ABS system can increase stopping distances and affect vehicle safety.
• Vehicle stationary
• Ignition on
The wheel speed sensor is located near the brake rotor of the front left wheel.
Q: Can I drive with a P14F0 code?
A: You can drive, but it's not recommended as the ABS and traction control systems may not work properly.
Q: How long does it take to fix a P14F0 code?
A: Repair time can vary, but it typically takes 1-2 hours depending on the issue.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.