Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This means that the car's computer detected that the engine isn't running smoothly because cylinder number 6 isn't working right. To protect the engine, it stopped sending fuel to that cylinder.
The engine control module (ECM) has detected a misfire in cylinder 6 and has cut off fuel to that cylinder to prevent damage.
The P1353 code indicates that the ECM has detected a misfire in cylinder 6. A misfire occurs when the air-fuel mixture in the cylinder does not ignite properly. The ECM cuts off fuel to the misfiring cylinder to prevent damage to the catalytic converter and other engine components.
• Check Engine Light is on
• Rough idling
• Poor engine performance
• Increased fuel consumption
• Engine stalling or hesitation
• Faulty spark plug in cylinder 6
• Defective ignition coil for cylinder 6
• Fuel injector issues in cylinder 6
• Vacuum leak affecting cylinder 6
• Compression problems in cylinder 6
ECM: Engine Control Module
Misfire: A failure of the air-fuel mixture in a cylinder to ignite properly
• Use an OBD-II scanner to confirm the code
• Inspect spark plug and ignition coil for cylinder 6
• Check the fuel injector for cylinder 6
• Perform a compression test on cylinder 6
• Inspect for vacuum leaks around cylinder 6
• Replace faulty spark plug in cylinder 6
• Replace defective ignition coil for cylinder 6
• Clean or replace fuel injector for cylinder 6
• Repair any vacuum leaks
• Address any compression issues
• OBD-II scanner
• Spark plug socket
• Compression tester
• Multimeter
• Fuel injector tester
$150 - $500
Moderate
• Toyota Camry
• Honda Accord
• Ford F-150
• Regularly replace spark plugs
• Perform routine engine maintenance
• Use high-quality fuel
Engine Performance
• Do not drive the vehicle for extended periods with this code active
• Seek professional diagnostics if unsure about repairs
Check with the vehicle manufacturer for warranty coverage on engine components.
This code has been commonly associated with ignition system failures and is often reported in vehicles with high mileage.
High – Misfires can lead to engine damage if not addressed promptly.
Driving with a misfiring engine can be unsafe and may cause further damage to the vehicle.
• Engine at operating temperature
• Vehicle in a safe, stationary position
Cylinder 6 is typically located on the engine block, which varies depending on the vehicle's engine design.
Q: Can I drive with a P1353 code?
A: It's not recommended to drive with a misfire code as it can cause further engine damage.
Q: What happens if I ignore a P1353 code?
A: Ignoring this code can lead to more severe engine damage and increased repair costs.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Relevant when catalyst-efficiency or emissions faults persist after proper diagnosis.
Catalyst-efficiency faults sometimes point toward converter problems after proper testing.
Catalytic converters are highly vehicle-specific and should not be purchased by code alone.
View options on Amazon
Fitment Required · Vehicle-fitment part
Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.
Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.
Check the correct plug type, gap, and engine application for your vehicle.
View options on Amazon
Fitment Required · Vehicle-fitment part
Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.
Some ignition faults involve coil performance or cylinder-specific coil problems.
Match the coil to your engine and confirm the failed component before ordering.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.