Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer is getting a weak signal from a sensor that listens for engine noises. This sensor helps the car run smoothly.
The code indicates that the knock sensor on bank 2 is sending a signal that is too low, which can affect engine performance.
The knock sensor is responsible for detecting vibrations caused by engine knocking or pinging. When the sensor's signal is too low, it may not properly detect these vibrations, potentially leading to engine damage if not addressed. Bank 2 refers to the side of the engine opposite bank 1 in a V-type engine.
• Check Engine Light is on
• Poor engine performance
• Reduced fuel efficiency
• Faulty knock sensor
• Wiring issues or poor connection in the knock sensor circuit
• ECU (Engine Control Unit) malfunction
Knock Sensor: A device that detects engine knocking or pinging.
ECU: Engine Control Unit, the computer that controls engine functions.
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connections to the knock sensor.
• Test the knock sensor for proper operation.
• Replace the faulty knock sensor.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ECU if necessary.
• OBD-II scanner
• Multimeter
• Socket set
$150 - $400
Moderate
• Toyota Camry
• Honda Accord
• Nissan Altima
• Regular maintenance and inspection of engine components.
• Ensure proper engine tuning.
• Use high-quality fuel.
Sensor Issue
• Avoid driving the vehicle aggressively until the issue is resolved.
• Schedule a service appointment with a qualified mechanic.
Check if the vehicle is still under warranty for powertrain components, which may cover the repair.
This code has been associated with sensor failures in older vehicles, often due to wear and tear or environmental factors.
Moderate – Should be addressed soon to prevent potential engine damage.
Ignoring this issue could lead to engine damage, which may not be covered under warranty if neglected.
• Engine at operating temperature
• Vehicle in a safe, stationary position
The knock sensor is typically located on the engine block, cylinder head, or intake manifold.
Q: Can I drive with a P1329 code?
A: It's possible to drive short distances, but it's recommended to fix the issue soon to avoid engine damage.
Q: How do I know if my knock sensor is bad?
A: Symptoms include poor engine performance, reduced fuel efficiency, and a check engine light.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.