Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the sensor that checks the pressure in the fuel tank is reading too high. It's like when a balloon is filled with too much air.
The Engine Control Module (ECM) has detected a high pressure reading from the fuel tank pressure/temperature sensor.
The P11E5 code is triggered when the fuel tank pressure/temperature sensor sends a signal to the ECM indicating a pressure level that is higher than the expected range. This could be due to a malfunction in the sensor itself, wiring issues, or an actual increase in fuel tank pressure.
• Check Engine Light is on
• Possible fuel smell
• Decreased fuel efficiency
• Faulty fuel tank pressure/temperature sensor
• Wiring issues or poor electrical connections
• Blocked or kinked fuel vapor lines
ECM: Engine Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the P11E5 code.
• Inspect the fuel tank pressure sensor and its wiring for damage.
• Check for blockages in the fuel vapor lines.
• Replace the faulty fuel tank pressure/temperature sensor.
• Repair or replace damaged wiring or connectors.
• Clear any blockages in the fuel vapor lines.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Chevrolet Silverado
• Ford F-150
• Toyota Camry
• Regularly inspect fuel vapor lines for blockages.
• Ensure proper maintenance of the fuel system.
• Use quality fuel to prevent deposits.
Sensor Issue
• Do not ignore the Check Engine Light.
• Check for fuel odors around the vehicle.
• Consult a professional mechanic if unsure.
Check with your vehicle manufacturer for specific warranty coverage on emissions-related components.
This code has been associated with issues in vehicles with older fuel systems or those exposed to harsh environmental conditions.
Moderate – It should be addressed soon to avoid potential fuel system damage.
Driving with a fuel system issue can be hazardous. Address the issue promptly to ensure safety.
• Vehicle at operating temperature
• Fuel tank not overfilled
The fuel tank pressure/temperature sensor is typically located on or near the fuel tank.
Q: Can I drive with the P11E5 code?
A: While the vehicle may still be drivable, it's best to address the issue promptly to avoid potential fuel system damage.
Q: What happens if I ignore the P11E5 code?
A: Ignoring this code can lead to decreased fuel efficiency and potential damage to the fuel system.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.