Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer has detected that the sensor checking the fuel tank's pressure and temperature is getting too hot for a short period.
The P11E1 code is triggered when the Engine Control Module (ECM) detects that the fuel tank pressure/temperature sensor is experiencing a temporary overtemperature condition.
The fuel tank pressure/temperature sensor monitors the pressure and temperature inside the fuel tank. If the sensor detects a temperature that exceeds the expected range for a short duration, the ECM registers the P11E1 code. This could be due to sensor malfunction, wiring issues, or actual temperature spikes.
• Check Engine Light illuminated
• Possible fuel odor
• Decreased fuel efficiency
• Faulty fuel tank pressure/temperature sensor
• Wiring issues such as shorts or open circuits
• Actual high temperature within the fuel tank
ECM: Engine Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connections to the sensor.
• Test the sensor for proper operation and temperature readings.
• Replace the faulty sensor if needed.
• Repair or replace damaged wiring or connectors.
• Ensure proper ventilation and cooling of the fuel tank area.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Chevrolet Silverado
• Ford F-150
• Toyota Camry
• Regularly inspect and maintain fuel system components.
• Ensure proper ventilation around the fuel tank.
• Use high-quality fuel to prevent deposits.
Sensor Issue
• If the Check Engine Light is on, have the vehicle inspected promptly.
• Avoid driving with a full tank if the issue persists.
Check with the vehicle manufacturer for warranty coverage on emissions-related components.
This code is relatively uncommon and often related to specific models with sensitive fuel tank sensors.
Moderate – While the vehicle may still be drivable, it is important to address the issue to prevent potential fuel system damage.
Ignoring this code could lead to increased emissions and potential safety hazards due to fuel system pressure issues.
• Engine at operating temperature
• Fuel tank between 1/4 and 3/4 full
The fuel tank pressure/temperature sensor is typically located on or near the fuel tank.
Q: Can I drive with the P11E1 code?
A: While you may be able to drive with this code, it is recommended to have it checked to avoid potential fuel system issues.
Q: How serious is the P11E1 code?
A: It's moderately serious as it can affect fuel efficiency and emissions. It should be addressed to prevent further issues.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.