Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
Your car has a sensor that checks the pressure in the fuel tank. This sensor is stuck and not working properly.
The fuel tank pressure/temperature sensor is responsible for monitoring the pressure inside the fuel tank. When the sensor signal is stuck, it means the sensor is not sending the correct information to the car's computer.
The P119F code indicates that the fuel tank pressure/temperature sensor is not providing a variable signal to the engine control module (ECM). This could be due to a mechanical failure of the sensor or an electrical issue such as a short or open circuit.
• Check Engine Light is on
• Possible fuel smell
• Poor fuel economy
• Faulty fuel tank pressure/temperature sensor
• Wiring issues such as a short or open circuit
• Connector problems at the sensor
ECM: Engine Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code
• Inspect the wiring and connectors to the sensor
• Test the sensor for proper operation
• Replace the faulty sensor
• Repair or replace damaged wiring
• Ensure connectors are clean and secure
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $300
Moderate
• Vehicle 1
• Vehicle 2
• Vehicle 3
• Regular maintenance checks
• Inspect wiring for damage
• Use quality fuel to prevent sensor damage
Sensor Issue
• Avoid overfilling the fuel tank
• Have the vehicle checked by a professional
• Monitor fuel economy for changes
Check with the manufacturer for specific warranty coverage on emissions-related components.
This code has been reported in vehicles with fuel system issues, often related to sensor failures.
Moderate – It should be addressed soon to prevent further issues, but the car is typically still drivable.
Driving with a malfunctioning fuel system sensor can lead to increased emissions and potential safety hazards.
• Engine at operating temperature
• Fuel tank at least half full
The fuel tank pressure/temperature sensor is located on or near the fuel tank, often accessible from underneath the vehicle.
Q: Can I drive with a P119F code?
A: Yes, but it's best to get it checked soon to avoid further issues.
Q: Will the P119F code affect my fuel economy?
A: It might, as the sensor helps the engine run efficiently.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.