ezOBD2 - Free OBD2 Code Lookup and Check Engine Light Diagnostic Tool

Find Your OBD2 Code Fast

Type the code from your scanner to get causes, symptoms, and fixes.

Code P1137

Quick reference

P1137 at a glance

Plain-language meaning
This code means that the car's computer is having trouble with the heater part of an oxygen sensor. It's like a little thermometer in the car's exhaust pipe that's not working right all the time.
Urgency
Moderate – While the vehicle may still operate, it can lead to poor fuel efficiency and potential emissions test failures.
Difficulty
Moderate
System
Sensor Issue
Tools mentioned
OBD-II scanner, Multimeter, Socket set

This summary uses the existing diagnostic information shown in full below.

Laymans terms

This code means that the car's computer is having trouble with the heater part of an oxygen sensor. It's like a little thermometer in the car's exhaust pipe that's not working right all the time.

Explanation

The P1137 code is triggered when the Engine Control Module (ECM) detects an intermittent signal from the heater circuit of the oxygen sensor located in Bank 1, Sensor 2.

Technical description

The oxygen sensor measures the amount of oxygen in the exhaust gases. The heater circuit helps the sensor reach the operating temperature quickly. An intermittent signal indicates that the heater circuit is not consistently providing the necessary heat, which can affect the sensor's performance.

Symptoms

• Check Engine Light is on

• Poor fuel economy

• Failed emissions test

Common Causes

• Faulty oxygen sensor

• Damaged wiring or connectors

• Blown fuse for the heater circuit

Glossary

ECM: Engine Control Module

OBD-II: On-Board Diagnostics II

Diagnosis steps

• Use an OBD-II scanner to confirm the code.

• Inspect the wiring and connectors for damage.

• Test the oxygen sensor heater circuit for continuity.

Repair procedures

• Replace the faulty oxygen sensor.

• Repair or replace damaged wiring or connectors.

• Replace any blown fuses in the heater circuit.

Tools required

• OBD-II scanner

• Multimeter

• Socket set

Estimated repair cost

$150 - $300

Difficulty level

Moderate

Commonly affected vehicles

• Ford F-150

• Toyota Camry

• Honda Accord

Preventive measures

• Regularly inspect and maintain the exhaust system.

• Ensure timely replacement of oxygen sensors.

• Check wiring and connectors during routine maintenance.

Error code type

Sensor Issue

User experience recommendations

• Get the vehicle inspected by a professional mechanic.

• Avoid ignoring the Check Engine Light.

• Consider regular maintenance to prevent future issues.

Warranty information

Oxygen sensors may be covered under the vehicle's emissions warranty.

Historical data

Oxygen sensor issues have been common with vehicles as they age, especially in models with high mileage.

Urgency level

Moderate – While the vehicle may still operate, it can lead to poor fuel efficiency and potential emissions test failures.

Testing conditions

• Engine at operating temperature

• Vehicle in closed-loop operation

Component location

The oxygen sensor is located in the exhaust system, typically after the catalytic converter on Bank 1.

FAQs

Q: Can I drive my car with a P1137 code?
A: While you can drive the car, it's not recommended as it can lead to poor fuel efficiency and emissions issues.

Q: How do I know if my oxygen sensor needs replacing?
A: Symptoms include a Check Engine Light, poor fuel economy, and failed emissions tests.

Optional diagnostic gear

Tools that may help diagnose P1137

THINKCAR ThinkScan Bidirectional diagnostic tool illustration

High-End · Full-system diagnostics

THINKCAR ThinkScan Bidirectional

A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.

Network faults often require full-system access instead of a generic code reader alone.

View on Amazon
Klein Tools MM325 diagnostic tool illustration

Universal · Digital multimeter

Klein Tools MM325

A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.

Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.

View on Amazon
WORKPRO Wiring Repair Kit diagnostic tool illustration

Universal · Wire connectors and repair kit

WORKPRO Wiring Repair Kit

Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.

Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.

View on Amazon

These are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.

Fitment matters

Commonly referenced parts for P1137

Denso Oxygen Sensor product illustration

Fitment Required · Vehicle-fitment part

Denso Oxygen Sensor

Relevant when the code or supporting diagnostics point toward upstream or downstream oxygen-sensor faults.

This code family often involves upstream or downstream oxygen-sensor diagnosis.

Verify exact sensor position and vehicle fitment before buying.

View options on Amazon
Walker Catalytic Converter product illustration

Fitment Required · Vehicle-fitment part

Walker Catalytic Converter

Relevant when catalyst-efficiency or emissions faults persist after proper diagnosis.

Catalyst-efficiency faults sometimes point toward converter problems after proper testing.

Catalytic converters are highly vehicle-specific and should not be purchased by code alone.

View options on Amazon

These parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.

Source: ezOBD2 diagnostic database
🌙