Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the gas pedal isn't moving the way it should. It's like when you press a button and nothing happens, but with the gas pedal.
The P110C code is set when the Engine Control Module (ECM) detects an implausible signal from the pedal position sensor, indicating that the pedal travel does not match expected values.
The pedal position sensor is responsible for sending signals to the ECM about the position of the accelerator pedal. If the ECM receives a signal that doesn't match the expected range or pattern, it triggers the P110C code. This could be due to a faulty sensor, wiring issues, or a problem with the ECM itself.
• Check Engine Light on
• Reduced engine performance
• Unresponsive throttle
• Faulty pedal position sensor
• Damaged or corroded wiring/connectors
• ECM malfunction
ECM: Engine Control Module
OBD-II: On-Board Diagnostics II
• Use an OBD-II scanner to confirm the code
• Inspect the pedal position sensor and its wiring
• Test the sensor with a multimeter for proper voltage and resistance
• Replace the pedal position sensor
• Repair or replace damaged wiring/connectors
• Reprogram or replace the ECM if necessary
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $500
Moderate
• Ford Focus
• BMW 3 Series
• Volkswagen Golf
• Regularly inspect and clean the pedal sensor connector
• Ensure the wiring is not exposed to moisture
• Perform routine diagnostic checks
Sensor Issue
• Avoid driving aggressively until the issue is resolved
• Have the vehicle inspected by a professional mechanic
Check with the vehicle manufacturer for warranty coverage on emissions-related components.
The P110C code has been associated with vehicles that have electronic throttle controls, becoming more common as these systems are widely adopted.
Moderate – It's advisable to address this issue soon to avoid potential drivability problems.
Driving with a malfunctioning pedal position sensor can lead to reduced control over the vehicle, posing a safety risk.
• Engine running
• Vehicle stationary
The pedal position sensor is located near the accelerator pedal assembly.
Q: Can I drive with a P110C code?
A: It's possible but not recommended, as it may affect throttle response and vehicle performance.
Q: How can I reset the P110C code?
A: You can clear the code with an OBD-II scanner, but it's important to fix the underlying issue first.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.