Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's engine has a part that helps control how much air goes in. This part isn't moving as much as it should, so the car is being extra careful and not driving as fast to keep things safe.
The Variable Valve Lift (VVL) system is not reaching the full stroke position on Bank 2, causing the engine to enter a 'limp home' mode to prevent damage.
The VVL system is designed to adjust the lift of the engine's valves to optimize performance and efficiency. If the system detects that the full stroke position is not being achieved, it triggers a limp home mode to protect the engine. This issue is specific to Bank 2, which refers to the side of the engine with the second set of cylinders.
• Reduced engine power
• Check Engine Light is on
• Poor fuel economy
• Faulty VVL actuator
• Wiring or connection issues in the VVL system
• Mechanical obstruction in the VVL mechanism
VVL: Variable Valve Lift
Bank 2: The side of the engine with the second set of cylinders
• Check for any stored trouble codes and freeze frame data.
• Inspect the VVL actuator and related wiring on Bank 2.
• Perform a mechanical inspection of the VVL mechanism.
• Replace the faulty VVL actuator.
• Repair or replace damaged wiring or connectors.
• Remove any obstructions in the VVL mechanism.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $600
Moderate
• Vehicle 1
• Vehicle 2
• Vehicle 3
• Regular maintenance of the VVL system
• Ensure clean and quality engine oil
• Regular inspection of electrical connections
Engine Performance
• Avoid driving at high speeds until the issue is resolved.
• Consult a professional mechanic for accurate diagnosis.
Check with your vehicle's manufacturer for warranty coverage on engine components.
This code is relatively uncommon and typically associated with advanced variable valve systems.
Moderate – It is important to address this issue soon to avoid potential engine damage.
Driving with reduced engine power can affect vehicle handling and safety.
• Engine at operating temperature
• Vehicle in drive mode
The VVL actuator for Bank 2 is located on the side of the engine with the second set of cylinders.
Q: Can I drive my car with this code?
A: It's best to avoid driving long distances or at high speeds until the issue is fixed.
Q: What happens if I ignore this code?
A: Ignoring this code can lead to reduced fuel efficiency and potential engine damage.
Budget · Bluetooth scanner
An app-based scanner with repair reports and enhanced system diagnostics on supported vehicles.
Helpful when live data and repair-report guidance can narrow down a drivability issue.
View on Amazon
Specialty · Fuel pressure tester
Helpful for no-start, lean, rich, injector, and fuel-delivery diagnosis.
Useful for checking whether fuel delivery is contributing to the fault.
View on Amazon
Specialty · Compression tester
Useful when misfire, mechanical condition, or low-cylinder-pressure problems are suspected.
Helpful when you need to rule out low compression or mechanical engine problems.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.