Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car has a special sensor that helps control how the engine breathes. This sensor is not working correctly on one side of the engine.
The VVL (Variable Valve Lift) guiding sensor detects the position of the camshaft to adjust the valve lift. An error indicates the sensor is not reading the position correctly.
The P1007 code is triggered when the ECM (Engine Control Module) detects an incorrect gradient or position reading from the VVL guiding sensor on Bank 1. This can affect the engine's performance by not optimizing the valve lift for efficiency and power.
• Check Engine Light is on
• Reduced engine performance
• Poor fuel economy
• Faulty VVL guiding sensor
• Wiring issues in the sensor circuit
• Faulty ECM
VVL: Variable Valve Lift
ECM: Engine Control Module
• Use an OBD-II scanner to confirm the code.
• Inspect the VVL guiding sensor and its wiring for damage.
• Test the sensor's output with a multimeter.
• Replace the faulty VVL guiding sensor.
• Repair or replace damaged wiring.
• Reprogram or replace the ECM if necessary.
• OBD-II scanner
• Multimeter
• Socket set
$150 - $500
Moderate
• Honda Accord
• Acura TL
• Nissan Altima
• Regular maintenance and inspections
• Timely replacement of faulty sensors
• Keeping the engine control system updated
Sensor Issue
• Have the vehicle inspected by a professional.
• Avoid heavy acceleration until the issue is resolved.
Check with the vehicle manufacturer for warranty coverage on emission-related components.
This code is commonly associated with vehicles using advanced variable valve timing systems introduced in the early 2000s.
Moderate – While the vehicle may still be drivable, performance and fuel efficiency will be affected.
Ignoring this issue may lead to increased emissions, which could violate local environmental regulations.
• Engine at operating temperature
• Vehicle in idle or low-load conditions
The VVL guiding sensor is typically located near the camshaft on the engine's Bank 1 side.
Q: Can I drive with a P1007 code?
A: You can drive the vehicle, but it is not recommended due to reduced performance and efficiency.
Q: How can I prevent this code from appearing?
A: Regular maintenance and timely sensor replacements can help prevent this issue.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.