Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks there is a problem with the sensor that checks the electricity going to the air conditioner's motor.
The code P0EB6 indicates an issue with the current sensor circuit for the A/C compressor motor's Phase V. It is reading a lower than expected voltage.
The A/C compressor in hybrid and electric vehicles is often electrically driven. The motor has multiple phases, and sensors monitor the current in each phase to ensure proper operation. A 'circuit low' error suggests that the sensor for Phase V is reporting a current lower than expected, which could be due to a sensor fault, wiring issue, or a problem with the compressor motor itself.
• A/C not cooling properly
• Check engine light on
• Unusual noises from the A/C system
• Faulty current sensor
• Damaged wiring or connectors
• Faulty A/C compressor motor
A/C: Air Conditioning
OBD-II: On-Board Diagnostics, second generation
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for the A/C compressor motor.
• Test the current sensor for proper operation.
• Replace the faulty current sensor.
• Repair or replace damaged wiring or connectors.
• Replace the A/C compressor motor if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $800
Moderate
• Toyota Prius
• Chevrolet Volt
• Nissan Leaf
• Regular maintenance of the A/C system
• Check and repair any wiring issues promptly
• Ensure the A/C system is not overloaded
Sensor Issue
• Have the A/C system checked by a professional.
• Avoid using the A/C until the issue is resolved to prevent further damage.
Check with the vehicle manufacturer for warranty coverage on the A/C system components.
This code is more common in hybrid and electric vehicles due to their use of electric A/C compressors.
Moderate – While the vehicle can still be driven, the A/C system may not function properly, affecting comfort.
Driving without a properly functioning A/C system may not be a safety issue, but it can affect comfort and visibility if the defogger is not working.
• Vehicle must be in 'Ready' mode.
• A/C system must be activated.
The current sensor is typically located near the A/C compressor motor, often in the engine bay.
Q: Can I drive my car with this code?
A: Yes, but the A/C may not work properly, which could affect comfort.
Q: Will this code affect my car's performance?
A: No, it primarily affects the A/C system, not the engine performance.
Budget · Enhanced code reader
A wired color-screen reader with readiness hotkeys, live data, code definitions, and data logging.
A dependable first-pass scanner for verifying the code and checking live data or readiness monitors.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for voltage, continuity, and basic electrical checks while narrowing down the fault.
View on Amazon
Universal · Socket set
A practical metric and SAE socket set for many diagnostic teardowns and component replacements.
Useful for common under-hood access and removal work during diagnosis or repair.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.