Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car has a part that helps control the engine's temperature by letting coolant flow through. This part is stuck and can't open, which can make the engine too hot.
The coolant bypass valve helps regulate engine temperature by controlling the flow of coolant. If it is stuck closed, the coolant cannot circulate properly, potentially leading to overheating.
The P0E80 code indicates that the coolant bypass valve B is not functioning correctly because it is stuck in the closed position. This prevents the proper flow of coolant through the engine, which can lead to inefficient engine cooling and potential overheating.
• Engine overheating
• Check Engine Light illuminated
• Reduced engine performance
• Faulty coolant bypass valve
• Electrical issue in the valve control circuit
• Mechanical blockage or debris in the valve
Coolant: A fluid that absorbs heat from the engine and dissipates it through the radiator.
Bypass Valve: A valve that directs the flow of coolant in the engine.
• Use an OBD-II scanner to confirm the code.
• Inspect the coolant bypass valve for physical damage or blockage.
• Check the electrical connections and wiring to the valve.
• Replace the coolant bypass valve if faulty.
• Clear any blockages in the valve.
• Repair or replace damaged wiring or connectors.
• OBD-II scanner
• Multimeter
• Wrench set
$150 - $400
Moderate
• Toyota Prius
• Chevrolet Volt
• Ford Fusion Hybrid
• Regularly check and maintain coolant levels.
• Inspect cooling system components for wear.
• Ensure proper coolant type is used.
Engine Performance
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if overheating occurs.
• Regularly maintain the cooling system.
Check with the vehicle manufacturer for specific warranty coverage on engine components.
This code has been more common in hybrid vehicles due to their complex cooling systems.
High – Engine overheating can cause severe damage if not addressed promptly.
Driving with an overheated engine can be dangerous and may lead to engine failure.
• Engine at operating temperature
• Vehicle stationary or at idle
The coolant bypass valve is typically located near the engine block or radiator.
Q: Can I drive with a P0E80 code?
A: It's not recommended to drive with this code as it can lead to engine overheating.
Q: How do I know if my coolant bypass valve is stuck?
A: Symptoms include engine overheating and a Check Engine Light. A professional diagnosis is recommended.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.