Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that a sensor in the car that helps detect how close things are is sending a very high signal, which might mean something is wrong.
The P0D59 code indicates that the signal from the proximity detection circuit 'A' is higher than expected, suggesting a potential issue with the sensor or circuit.
The Proximity Detection Circuit A is responsible for detecting objects or obstacles near the vehicle. A 'high' signal suggests that the circuit is receiving a voltage or resistance reading above the normal range, which could be due to a short circuit, faulty sensor, or wiring issue.
• Warning light on the dashboard
• Proximity sensors not functioning properly
• Erratic behavior of parking assist features
• Faulty proximity sensor
• Short circuit in the wiring
• Corrosion or damage in the connector
Proximity Sensor: A device that detects objects near the vehicle without physical contact.
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics and reporting in vehicles.
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors of the proximity sensor.
• Test the sensor for proper operation.
• Replace the faulty proximity sensor.
• Repair or replace damaged wiring.
• Clean and secure any corroded connectors.
• OBD-II scanner
• Multimeter
• Screwdriver set
$100 - $300
Moderate
• Toyota Prius
• Chevrolet Volt
• Nissan Leaf
• Regularly inspect sensors and wiring for damage.
• Keep connectors clean and free from corrosion.
• Avoid exposure to excessive moisture and dirt.
Sensor Issue
• Have the vehicle inspected by a professional if you are unsure.
• Do not ignore the warning light as it might affect safety features.
• Regular maintenance can help prevent such issues.
Check with your vehicle manufacturer for warranty coverage on sensors.
This code has been more common in vehicles with advanced parking assist systems.
Moderate – It should be addressed soon to ensure safety features function properly.
Ignoring this code may affect vehicle safety systems, which could be a legal liability.
• Vehicle parked in a safe location.
• Ensure the area around the sensor is clear.
The proximity sensor is typically located in the front or rear bumper of the vehicle.
Q: Can I drive with a P0D59 code?
A: Yes, but it's recommended to get it fixed soon to ensure all safety features work properly.
Q: Will this code affect my car's performance?
A: It might not affect driving performance directly, but it can impact safety features like parking assist.
Budget · Bluetooth scanner
An app-based scanner with repair reports and enhanced system diagnostics on supported vehicles.
Helpful when live data and repair-report guidance can narrow down a drivability issue.
View on Amazon
Specialty · Fuel pressure tester
Helpful for no-start, lean, rich, injector, and fuel-delivery diagnosis.
Useful for checking whether fuel delivery is contributing to the fault.
View on Amazon
Specialty · Compression tester
Useful when misfire, mechanical condition, or low-cylinder-pressure problems are suspected.
Helpful when you need to rule out low compression or mechanical engine problems.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.