Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's an electrical problem with a part in the car's transmission that helps control the pressure of the fluid. It's like a switch that isn't working right.
The P08C6 code is triggered when the transmission control module (TCM) detects an electrical fault in the pressure control solenoid M circuit.
Pressure control solenoids are used in automatic transmissions to regulate hydraulic pressure. The solenoid M is one of several solenoids responsible for this task. An electrical fault could mean a short circuit, open circuit, or a problem with the solenoid itself.
• Transmission slipping
• Harsh or erratic shifting
• Check Engine Light illuminated
• Faulty pressure control solenoid M
• Wiring issues such as short or open circuits
• Faulty transmission control module (TCM)
Solenoid: A coil of wire that acts as a magnet when carrying electric current.
TCM: Transmission Control Module, a component that controls transmission functions.
• Use an OBD-II scanner to confirm the code.
• Inspect wiring and connectors for damage or corrosion.
• Test the solenoid for proper operation.
• Repair or replace damaged wiring or connectors.
• Replace the faulty pressure control solenoid M.
• Reprogram or replace the TCM if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$200 - $600
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regular transmission fluid checks and changes
• Inspect wiring regularly for wear
• Avoid aggressive driving habits
Transmission Control System Issue
• Avoid driving aggressively until repaired.
• Seek professional diagnosis if unsure.
Check if the vehicle's powertrain warranty covers transmission repairs.
This code has been more prevalent in vehicles with higher mileage or those that frequently tow heavy loads.
Moderate – Addressing this issue promptly can prevent further transmission damage.
Driving with a faulty transmission can lead to unsafe driving conditions. Address this issue as soon as possible.
• Vehicle at operating temperature
• Transmission in drive
The pressure control solenoid is located inside the transmission, often accessible by removing the transmission pan.
Q: Can I drive with a P08C6 code?
A: It's not recommended to drive for long periods with this code, as it can lead to further transmission damage.
Q: How is the pressure control solenoid tested?
A: A technician will use a multimeter to check the solenoid's resistance and ensure it's within specifications.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.