Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that a sensor inside the car's computer is reading a temperature that's too high. It's like when a thermometer says it's really hot outside.
The vehicle's control module has an internal temperature sensor that monitors its operating temperature. Code P06AE indicates that this sensor is reading a temperature higher than expected.
The P06AE code is triggered when the Engine Control Module (ECM) detects a high voltage signal from the internal temperature sensor B circuit. This may indicate that the sensor is reporting a temperature higher than the operational threshold, which could be due to a sensor fault, wiring issue, or actual overheating.
• Check Engine Light is on
• Possible engine performance issues
• Vehicle may enter limp mode
• Faulty internal temperature sensor
• Wiring issues such as shorts or open circuits
• Overheating of the control module
ECM: Engine Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code
• Inspect wiring and connectors for damage
• Test the internal temperature sensor for proper operation
• Replace the faulty temperature sensor
• Repair or replace damaged wiring and connectors
• Ensure proper cooling of the control module
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Dodge Ram
• Regularly inspect and maintain vehicle wiring
• Ensure proper ventilation and cooling for the control module
• Avoid extreme driving conditions that may cause overheating
Sensor Issue
• Do not ignore the Check Engine Light
• Have the vehicle inspected by a professional
• Avoid driving the vehicle if it shows signs of overheating
Check with the vehicle manufacturer for specific warranty coverage related to the control module and sensors.
This code is relatively common in vehicles with complex electronic systems where sensor malfunctions or wiring issues can occur.
Moderate – It is important to address this issue to prevent potential damage to the control module.
Driving with an active Check Engine Light may not be safe. Always ensure vehicle issues are addressed promptly.
• Vehicle at operating temperature
• Engine running and stable
The internal temperature sensor is located within the vehicle's control module, typically under the dashboard or in the engine bay.
Q: Can I drive my car with code P06AE?
A: It's best to have it checked as soon as possible to avoid potential damage.
Q: What happens if I ignore this code?
A: Ignoring it could lead to more serious issues, including control module failure.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.