ezOBD2 - Free OBD2 Code Lookup and Check Engine Light Diagnostic Tool

Find Your OBD2 Code Fast

Type the code from your scanner to get causes, symptoms, and fixes.

Code P035F

Quick reference

P035F at a glance

Plain-language meaning
This code means that the computer in your car has detected a problem with the electrical signal going to one of the ignition coils. It's like when a light switch is turned on, but the light bulb doesn't light up because there's too much electricity trying to get through.
Urgency
Moderate – It is advisable to address this issue promptly to avoid engine performance problems.
Difficulty
Moderate
System
Engine Performance
Tools mentioned
OBD-II scanner, Multimeter, Basic hand tools

This summary uses the existing diagnostic information shown in full below.

Laymans terms

This code means that the computer in your car has detected a problem with the electrical signal going to one of the ignition coils. It's like when a light switch is turned on, but the light bulb doesn't light up because there's too much electricity trying to get through.

Explanation

The engine control module (ECM) monitors the ignition coil circuits for faults. If it detects a high voltage condition in the ignition coil 'F' control circuit, it sets the P035F code.

Technical description

The P035F code is triggered when the ECM detects a high voltage condition in the ignition coil 'F' control circuit. This could be due to a short to voltage or an open circuit. The ignition coil is responsible for converting the battery's low voltage to high voltage, which is necessary to create a spark in the engine's cylinders.

Symptoms

• Check Engine Light is on

• Engine misfires

• Poor fuel economy

• Reduced engine performance

Common Causes

• Faulty ignition coil

• Open or shorted ignition coil harness

• Poor electrical connection in the ignition coil circuit

• Faulty ECM

Glossary

ECM: Engine Control Module

OBD-II: On-Board Diagnostics, Second Generation

Diagnosis steps

• Use an OBD-II scanner to confirm the code.

• Inspect the ignition coil and its wiring for damage.

• Test the ignition coil for proper operation.

• Check for any open or short circuits in the ignition coil wiring.

Repair procedures

• Replace the faulty ignition coil.

• Repair or replace damaged wiring or connectors.

• Clear the code and test drive the vehicle to ensure the problem is fixed.

Tools required

• OBD-II scanner

• Multimeter

• Basic hand tools

Estimated repair cost

$100 - $300

Difficulty level

Moderate

Commonly affected vehicles

• Ford F-150

• Chevrolet Silverado

• Toyota Camry

Preventive measures

• Regularly inspect ignition coils and wiring.

• Perform routine maintenance as recommended by the manufacturer.

• Avoid driving through deep water which can damage electrical components.

Error code type

Engine Performance

User experience recommendations

• If the Check Engine Light is on, have your vehicle checked as soon as possible.

• Avoid driving the vehicle until the issue is resolved to prevent further damage.

Warranty information

Check if your vehicle's ignition system components are covered under the manufacturer’s warranty.

Historical data

The P035F code has been reported in vehicles with high mileage or those that have been exposed to harsh environmental conditions.

Urgency level

Moderate – It is advisable to address this issue promptly to avoid engine performance problems.

Testing conditions

• Engine idling

• Vehicle stationary

Component location

The ignition coil is typically located on top of the engine, near the spark plugs.

FAQs

Q: Can I drive my car with a P035F code?
A: It's not recommended to drive with a P035F code as it may lead to further engine damage.

Q: How can I prevent a P035F code from occurring?
A: Regular maintenance and inspection of the ignition system can help prevent this code.

Optional diagnostic gear

Tools that may help diagnose P035F

THINKCAR ThinkScan Bidirectional diagnostic tool illustration

High-End · Full-system diagnostics

THINKCAR ThinkScan Bidirectional

A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.

Network faults often require full-system access instead of a generic code reader alone.

View on Amazon
Klein Tools MM325 diagnostic tool illustration

Universal · Digital multimeter

Klein Tools MM325

A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.

Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.

View on Amazon
WORKPRO Wiring Repair Kit diagnostic tool illustration

Universal · Wire connectors and repair kit

WORKPRO Wiring Repair Kit

Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.

Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.

View on Amazon

These are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.

Fitment matters

Commonly referenced parts for P035F

NGK Spark Plugs product illustration

Fitment Required · Vehicle-fitment part

NGK Spark Plugs

Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.

Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.

Check the correct plug type, gap, and engine application for your vehicle.

View options on Amazon
Delphi Ignition Coil product illustration

Fitment Required · Vehicle-fitment part

Delphi Ignition Coil

Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.

Some ignition faults involve coil performance or cylinder-specific coil problems.

Match the coil to your engine and confirm the failed component before ordering.

View options on Amazon

These parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.

Source: ezOBD2 diagnostic database
🌙