Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer is saying that the part that helps put fuel into cylinder number 12 is getting too much electricity.
This code indicates that the Engine Control Module (ECM) has detected a high voltage condition in the fuel injector circuit for cylinder 12.
The P0295 code is triggered when the ECM detects a voltage signal from the injector circuit that is higher than the expected range. This could be due to a short circuit, faulty injector, or wiring issues.
• Check Engine Light is on
• Engine misfire
• Poor fuel economy
• Short circuit in the injector wiring
• Faulty fuel injector
• Faulty ECM
ECM: Engine Control Module
Injector: A device that sprays fuel into the engine's cylinders
• Use an OBD-II scanner to confirm the code.
• Inspect the wiring and connectors for cylinder 12 injector.
• Test the injector for proper resistance.
• Repair or replace damaged wiring or connectors.
• Replace the faulty injector.
• Replace or reprogram the ECM if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $500
Moderate
• BMW 7 Series
• Mercedes-Benz S-Class
• Audi A8
• Regular maintenance and inspection of the fuel system.
• Ensure proper electrical connections.
• Use quality fuel to prevent injector clogging.
Engine Performance
• Don't ignore the Check Engine Light.
• Have the vehicle inspected by a professional.
• Avoid driving the vehicle until the issue is resolved.
Check with your vehicle manufacturer for warranty coverage on fuel injectors.
This code is less common and typically associated with high-performance or luxury vehicles with more than 8 cylinders.
High – Ignoring this issue can lead to engine damage.
Driving with a misfiring engine can be dangerous and may not comply with emissions regulations.
• Engine running
• Warm engine
The injector for cylinder 12 is located on the engine block, typically on the side of the engine where cylinder 12 is positioned.
Q: Can I drive with a P0295 code?
A: It's not recommended as it can cause engine damage.
Q: What happens if I ignore the P0295 code?
A: Ignoring the code can lead to poor engine performance and potential engine damage.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.
Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.
Check the correct plug type, gap, and engine application for your vehicle.
View options on Amazon
Fitment Required · Vehicle-fitment part
Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.
Some ignition faults involve coil performance or cylinder-specific coil problems.
Match the coil to your engine and confirm the failed component before ordering.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.