Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
Your car has a thermometer for the fuel, and it's saying the fuel is too cold, but it might just be broken.
The Engine Control Module (ECM) is receiving a signal from the fuel temperature sensor that is lower than expected.
The P0182 code is triggered when the ECM detects that the voltage signal from the fuel temperature sensor 'A' circuit is below the normal operating range. This sensor measures the temperature of the fuel, and its readings are used by the ECM to adjust fuel delivery for optimal combustion.
• Check Engine Light is on
• Poor fuel economy
• Engine performance issues
• Difficulty starting the engine
• Faulty fuel temperature sensor
• Wiring issues such as shorts or open circuits
• Poor electrical connections
• ECM malfunction
ECM: Engine Control Module
OBD-II: On-Board Diagnostics II
• Use an OBD-II scanner to confirm the code.
• Inspect the fuel temperature sensor and its wiring for damage.
• Check the electrical connections for corrosion or looseness.
• Test the sensor's resistance and compare it to specifications.
• Replace the faulty fuel temperature sensor.
• Repair or replace damaged wiring or connectors.
• Clear the code and test drive the vehicle to ensure the issue is resolved.
• OBD-II scanner
• Digital multimeter
• Basic hand tools
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect and maintain the fuel system.
• Keep electrical connections clean and secure.
• Use quality fuel to prevent contamination.
Sensor Issue
• Do not ignore the Check Engine Light.
• Have the vehicle inspected by a professional if unsure.
• Regular maintenance can prevent such issues.
Check with your vehicle manufacturer; sensor issues may be covered under emissions warranty.
This code has been reported frequently in vehicles with high mileage or those exposed to harsh conditions.
Moderate – While the vehicle may still run, it can lead to poor performance and increased emissions.
Driving with a malfunctioning sensor may lead to increased emissions, which can be a legal concern in areas with strict emissions testing.
• Engine at operating temperature
• Vehicle in a safe and stable environment
The fuel temperature sensor is typically located near the fuel rail or in the fuel tank.
Q: Can I drive with a P0182 code?
A: While you can drive with this code, it's not recommended as it can lead to poor performance and higher emissions.
Q: How do I reset the Check Engine Light after fixing the issue?
A: Use an OBD-II scanner to clear the code, or disconnect the battery for a few minutes.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.