Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the sensor that measures the air temperature going into the engine is saying it's too high. It's like a thermometer telling you it's really hot when it shouldn't be.
The P00EB code is triggered when the Powertrain Control Module (PCM) detects a high voltage signal from the intake air temperature sensor 3 on bank 1, indicating an unusually high temperature reading.
The intake air temperature sensor measures the temperature of the air entering the engine. This information is used by the PCM to adjust the air-fuel mixture for optimal combustion. A circuit high condition indicates that the sensor is reporting a temperature that is higher than expected, which could be due to a sensor fault, wiring issue, or a problem with the PCM.
• Check Engine Light illuminated
• Poor fuel economy
• Engine performance issues
• Faulty intake air temperature sensor
• Wiring issues such as shorts or open circuits
• Faulty PCM
PCM: Powertrain Control Module
OBD-II: On-Board Diagnostics, Second Generation
• Use an OBD-II scanner to confirm the code.
• Inspect the intake air temperature sensor and its wiring.
• Test the sensor with a multimeter for proper resistance.
• Replace the intake air temperature sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the PCM if necessary.
• OBD-II scanner
• Multimeter
• Screwdriver set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect and clean the air intake system.
• Ensure all electrical connections are secure.
• Replace sensors at recommended intervals.
Sensor Issue
• Have the vehicle inspected by a professional mechanic.
• Avoid driving the vehicle until the issue is resolved to prevent further damage.
Check with the vehicle manufacturer for warranty coverage on sensors and related components.
This code has been associated with faulty sensors and wiring issues in various vehicle models over the years.
Moderate – While the vehicle may still be drivable, it is advisable to address the issue promptly to avoid performance problems.
Driving with a malfunctioning sensor can lead to increased emissions and potential engine damage.
• Engine at operating temperature
• Vehicle in a safe, stationary position
The intake air temperature sensor is typically located in the air intake duct or on the intake manifold.
Q: Can I drive with a P00EB code?
A: It's not recommended, as it can affect engine performance and emissions.
Q: How do I reset the check engine light after fixing the issue?
A: You can use an OBD-II scanner to clear the code after repairs are made.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.