Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's fuel system isn't getting enough pressure to work properly, like when a straw doesn't have enough suction to drink your favorite juice.
The code P0087 is triggered when the fuel pressure sensor detects that the fuel pressure in the fuel rail is lower than the expected range.
P0087 indicates that the fuel rail pressure is below the minimum threshold set by the manufacturer. This can affect the engine's ability to receive the correct amount of fuel, leading to performance issues.
• Engine misfires
• Poor acceleration
• Check Engine Light is on
• Faulty fuel pump
• Clogged fuel filter
• Fuel pressure sensor malfunction
Fuel Rail: A pipe that delivers fuel to the fuel injectors.
Fuel Pressure Sensor: A sensor that measures the pressure of fuel in the fuel rail.
• Check for any stored codes and freeze frame data.
• Inspect the fuel lines and connections for leaks.
• Test the fuel pressure with a gauge.
• Replace the fuel pump if faulty.
• Change the fuel filter if clogged.
• Replace or repair the fuel pressure sensor.
• OBD-II scanner
• Fuel pressure gauge
• Wrench set
$150 - $800
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly replace the fuel filter.
• Use high-quality fuel.
• Perform routine maintenance checks.
Engine Performance
• Do not ignore the Check Engine Light.
• Avoid driving the vehicle until the issue is fixed.
• Consult with a professional mechanic if unsure.
Check with the vehicle manufacturer for warranty coverage on fuel system components.
P0087 has been a common code for vehicles with high mileage, often related to fuel pump wear.
High – This issue can lead to engine stalling and should be addressed promptly.
Driving with low fuel pressure can cause engine damage and may not be safe. Address the issue as soon as possible.
• Engine running
• Vehicle at operating temperature
The fuel rail is located on the engine, typically near the top, where the fuel injectors are connected.
Q: Can I drive with a P0087 code?
A: It's not recommended to drive with this code as it can cause engine performance issues and potential damage.
Q: How do I clear a P0087 code?
A: After fixing the issue, you can clear the code with an OBD-II scanner, but it may return if the problem persists.
High-End · Full-system diagnostics
A full-system bidirectional platform aimed at advanced DIY users and professional diagnostic workflows.
Network faults often require full-system access instead of a generic code reader alone.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking voltage drops, grounds, and basic circuit health when modules are not communicating.
View on Amazon
Universal · Wire connectors and repair kit
Useful when diagnosis points toward damaged wiring, corroded terminals, or connector repairs.
Useful if diagnosis points toward damaged connectors, wiring, or terminal repairs.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.
Fitment Required · Vehicle-fitment part
Commonly relevant for misfire, ignition-efficiency, and some drivability-related repairs.
Misfire and ignition-related faults commonly involve spark plugs as part of the repair path.
Check the correct plug type, gap, and engine application for your vehicle.
View options on Amazon
Fitment Required · Vehicle-fitment part
Relevant when the fault points toward ignition-coil performance or cylinder-specific ignition issues.
Some ignition faults involve coil performance or cylinder-specific coil problems.
Match the coil to your engine and confirm the failed component before ordering.
View options on AmazonThese parts may be related to this fault category, but a code by itself does not confirm exact fitment or guarantee that replacing a part will solve the problem.