What is an OBD2 code?

An OBD2 (On-Board Diagnostics) code is a diagnostic trouble code (DTC) generated by your vehicle's computer system when it detects a problem. These codes help identify specific issues with your vehicle's engine, transmission, emissions, or other systems.

How do I read OBD2 codes?

To read OBD2 codes, you'll need an OBD2 scanner. Plug it into your vehicle's OBD2 port (usually located under the dashboard), turn your key to the 'ON' position, and follow your scanner's instructions to retrieve the codes. Each code starts with a letter (P, B, C, or U) followed by four numbers.

What do the different types of OBD2 codes mean?

OBD2 codes are categorized by their first letter: P (Powertrain) for engine and transmission issues, B (Body) for interior systems like airbags, C (Chassis) for mechanical systems like brakes, and U (Network) for computer and module communication problems.

🖨️

Home » OBD2 Codes » P0006

Code P0006

Symptoms

• Engine may not start

• Engine may stall

• Check Engine Light illuminated

Common Causes

• Faulty fuel shutoff valve

• Wiring issues such as a short circuit

• Poor electrical connection in the circuit

Glossary

ECM: Engine Control Module

OBD-II: On-Board Diagnostics, Second Generation

Related Codes

• P0005

• P0007

Official description

Fuel Shutoff Valve A Control Circuit Low

Laymans terms

This code means that the car's computer is having trouble controlling a valve that helps stop the fuel from flowing. It's like a switch that isn't working right.

Explanation

The P0006 code indicates that the fuel shutoff valve 'A' control circuit is reading a lower voltage than expected by the engine control module (ECM).

Technical description

The fuel shutoff valve is responsible for controlling the flow of fuel to the engine. The ECM monitors the voltage and current in the fuel shutoff valve circuit. If it detects a voltage level that is too low, it triggers the P0006 code. This could be due to a short circuit, poor connection, or a faulty valve.

Diagnosis steps

• Use an OBD-II scanner to confirm the code.

• Inspect the wiring and connectors for damage or corrosion.

• Test the fuel shutoff valve for proper operation.

Repair procedures

• Repair or replace damaged wiring or connectors.

• Replace the faulty fuel shutoff valve.

• Clear the code and test drive to ensure the issue is resolved.

Tools required

• OBD-II scanner

• Multimeter

• Basic hand tools

Estimated repair cost

$100 - $300

Difficulty level

Moderate

Commonly affected vehicles

• Ford F-150

• Chevrolet Silverado

• Toyota Camry

Preventive measures

• Regularly inspect and maintain electrical connections.

• Keep the fuel system clean and free of debris.

• Schedule regular vehicle maintenance.

Error code type

Engine Performance

User experience recommendations

• Do not ignore the Check Engine Light.

• Consult a professional mechanic if unsure about repairs.

Warranty information

Check your vehicle's warranty for coverage on engine control components.

Historical data

The P0006 code is not very common but can occur in vehicles with complex fuel systems.

Urgency level

High – This issue can prevent the engine from starting or cause stalling.

Legal and safety notice

Driving with this code can lead to engine stalling, which may be dangerous. Address the issue promptly.

Testing conditions

• Engine at operating temperature

• Vehicle in park or neutral

Component location

The fuel shutoff valve is typically located near the fuel rail or fuel tank.

FAQs

Q: Can I drive with a P0006 code?
A: It's not recommended, as it can cause the engine to stall unexpectedly.

Q: How do I clear a P0006 code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is fixed, it should not return.

Last updated: Feb 7, 2026 • Source: internal database

Diagnose Your Check Engine Light