Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that there's a problem with the car's ability to read how fast the wheels are spinning. It's like when your bike's speedometer stops working because the sensor isn't getting power.
The C1243 code indicates an issue with the power supply to the wheel speed sensors, which are crucial for the ABS system to function properly.
The C1243 code is triggered when the Anti-lock Braking System (ABS) module detects a malfunction in the power supply circuit to one or more of the wheel speed sensors. This can affect the vehicle's ability to monitor wheel speed accurately, impacting systems that rely on this information, such as ABS and traction control.
• ABS warning light on
• Traction control light on
• Inoperative ABS system
• Faulty wheel speed sensor
• Damaged wiring or connectors
• Blown fuse in the ABS circuit
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, Second Generation
• Check the ABS fuse and replace if necessary.
• Inspect the wiring and connectors for damage or corrosion.
• Test the wheel speed sensors for proper operation.
• Replace the faulty wheel speed sensor.
• Repair or replace damaged wiring or connectors.
• Replace the blown fuse in the ABS circuit.
• OBD-II scanner
• Multimeter
• Basic hand tools
$100 - $300
Moderate
• Toyota Camry
• Honda Accord
• Ford F-150
• Regularly inspect wheel speed sensors and wiring.
• Keep the ABS system clean and free of debris.
• Check fuses regularly and replace as needed.
Sensor Issue
• Do not ignore the ABS warning light.
• Have the vehicle inspected by a professional if unsure about repairs.
Repairs related to the ABS system may be covered under the vehicle's warranty if it is still active. Check with the manufacturer or dealer for specific warranty coverage.
The C1243 code has been commonly reported in vehicles with high mileage or those exposed to harsh environmental conditions, which can lead to sensor or wiring degradation.
Moderate – While the vehicle can still be driven, the ABS system may not function properly, which can affect braking performance in emergency situations.
Driving with a malfunctioning ABS system can increase the risk of accidents due to reduced braking performance. It is advisable to address this issue promptly.
• Vehicle parked on a level surface
• Ignition in the 'On' position
The wheel speed sensors are located at each wheel, often mounted near the brake rotor or hub assembly.
Q: Can I drive with the C1243 code?
A: Yes, but with caution. The ABS system may not work, which can affect braking in emergencies.
Q: How do I reset the ABS light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code and reset the light.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.