Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the brake pedal isn't moving as it should when you press it. It's like when you push a toy car and it doesn't roll as far as you expect.
The brake pedal position sensor measures how far and how fast the brake pedal is pressed. This code indicates that the sensor is not detecting the expected change in position.
The C106B code is triggered when the brake pedal position sensor detects a gradient (change in position) that is lower than expected. This could be due to a faulty sensor, wiring issues, or mechanical problems with the brake pedal assembly.
• Brake warning light on the dashboard
• Unusual brake pedal feel
• Reduced braking performance
• Faulty brake pedal position sensor
• Wiring issues or poor connections
• Mechanical problems with the brake pedal
Sensor: A device that detects or measures a physical property and records, indicates, or otherwise responds to it.
Gradient: The rate of change or slope, often used in the context of sensor readings.
• Inspect the brake pedal position sensor for damage.
• Check the wiring and connections to the sensor.
• Test the sensor's output with a multimeter.
• Replace the brake pedal position sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Adjust or repair the brake pedal assembly if needed.
• Multimeter
• Screwdriver set
• OBD-II scanner
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect brake components for wear.
• Ensure proper maintenance of the vehicle's electrical system.
• Avoid harsh braking to reduce wear on the brake pedal assembly.
Sensor Issue
• Have the vehicle inspected by a professional if the brake warning light is on.
• Avoid driving the vehicle until the issue is resolved to ensure safety.
Check if your vehicle's warranty covers sensor replacements.
This code has been more common in vehicles with electronic brake systems introduced in the last decade.
High – Brake system issues can affect vehicle safety and should be addressed promptly.
Driving with a malfunctioning brake system can be dangerous and may violate safety regulations.
• Vehicle parked on a level surface
• Engine running and brake pedal pressed
The brake pedal position sensor is typically located near the brake pedal assembly under the dashboard.
Q: Can I drive with a C106B code?
A: It's not recommended to drive with this code as it can affect braking performance and safety.
Q: How do I reset the C106B code?
A: After repairs, use an OBD-II scanner to clear the code from the vehicle's computer.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.