Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the sensor that tells it where the brake pedal is pushed too high. It's like when a game controller's button is stuck and the game thinks you're always pressing it.
The brake pedal position sensor sends a voltage signal to the vehicle's computer to indicate the position of the brake pedal. A 'voltage high' reading means the signal is higher than expected.
The C1067 code is triggered when the brake pedal position sensor sends a voltage signal that is higher than the predetermined threshold set by the vehicle's manufacturer. This could indicate a short circuit, a faulty sensor, or a wiring issue.
• Brake lights may stay on
• Cruise control may not work
• ABS warning light may illuminate
• Faulty brake pedal position sensor
• Wiring issues such as short circuits
• Faulty connections or corroded terminals
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics in vehicles.
Sensor: A device that detects or measures a physical property and records, indicates, or otherwise responds to it.
• Inspect the brake pedal position sensor for damage.
• Check the wiring and connectors for shorts or corrosion.
• Test the sensor's voltage output with a multimeter.
• Replace the brake pedal position sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Clear the code and test the system for proper operation.
• Multimeter
• OBD-II scanner
• Screwdriver set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect brake system components.
• Ensure electrical connections are clean and secure.
• Avoid exposure to moisture and corrosive elements.
Sensor Issue
• Avoid driving at high speeds until the issue is resolved.
• Check if the brake lights are functioning properly.
• Consult a professional mechanic if unsure about repairs.
Check with your vehicle manufacturer for warranty coverage on brake system components.
The C1067 code has been associated with issues in vehicles with electronic brake systems, particularly in models with advanced driver-assistance systems.
Moderate – It is important to address this issue to ensure proper brake function and vehicle safety.
Driving with malfunctioning brake sensors can be dangerous and may violate vehicle safety regulations.
• Vehicle ignition on
• Brake pedal pressed
The brake pedal position sensor is typically located near the brake pedal assembly, often mounted on or near the brake pedal arm.
Q: Can I drive with a C1067 code?
A: It's not recommended to drive with this code, as it can affect your braking system's performance and safety.
Q: How do I reset the C1067 code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue persists, further diagnosis is needed.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.